Installation Guide

6
Installation (continued)
5
Installing the stopper and
horizontal rod
□ Insert the stopper (F) into the drain hole in the
sink.
□ Before installation, unscrew the protective cap
(1) from the horizontal rod (L).
□ Insert the horizontal rod (L) into the drain body (J)
and through the hole of the stopper (F) until you
hear a click. See insert 2. You can press the two
sides of the joint (K) to remove the horizontal
rod (L).
6
Installing the lift rod
□ Slide the lift rod (O) down into the lift rod strap
(M) through the faucet (A) until it clicks into the
lift rod strap (M).
NOTE: For easier removal and cleaning, rotate the stopper
(F) 90 degrees so that the horizontal rod (L) does not go
through the hole in the stopper (F). See insert 3.
NOTE: If a shorter lift rod (O) is required for your
installation, you may call Glacier Bay Customer Service
for assistance.
Insert 3
Insert 2
1
1
L
2
J
F
3
K
L
J
K
2
O
M
O
M
1
O
A