Installation Guide

A
G
4
Installation
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle
to relieve water pressure and ensure that the water is completely shut off.
1b
□ Place the escutcheon (H) on the bottom of the
new faucet assembly (A).
□ Before installation, remove the ange (G).
NOTE: This step is for escutcheon installation (optional).
□ Insert the faucet assembly (A) through the hole
in the escutcheon (H).
□ Shut off the water supply. Remove the old faucet. Clean the mounting surface.
□ Unscrew the nut (D), and remove the washers (B & C).
1a
□ Before installation, ensure that the ange (G)
is placed on the bottom of the new faucet
assembly (A).
□ Insert the faucet assembly (A) through the hole
in the sink.
NOTE: This step is for ange installation (optional).
A
H
G