Installation Guide

6
Installation (continued)
4
Installing the weight
□ Insert the weight (K) onto the clip (L) by sliding
it down onto the clip (L).
□ Install the weight clip (L) at the point of the
hose marking “weight here”.
5
Making the water supply
connections
□ Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
1
2
Weight
here
Weight
here
L
K
L
K