Installation Guide

Installation

Installing the faucet assembly

CAUTION: Always shut off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□ Shut off the water supply. Remove the old

faucet.

□ Ensure the gasket (B) is on the bottom of the

new faucet (A).

□ Place the faucet (A) through the mounting

holes in the sink.

□ Secure the faucet (A) to the sink using the

mounting nuts (C) provided. Hand-tighten only.

NOTE: Silicone sealant is required under the gasket (B).

□ Clean the mounting surface.

Making the water supply

connections

□ Use 1/2 in. I.P.S. faucet connections (2), or use

supply line coupling nuts (3) (not included) with

a 3/8 in. O.D. ball-nose riser (1).

□ Use wrenches to tighten the connections. Do not

overtighten.

SILICONE