Model# HD834X-0001 SKU# 1002910935 INSTALLATION AND CARE GUIDE THREE-HANDLE TUB AND SHOWER FAUCET Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY THANK YOU We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this tub and shower faucet.
Table of Contents Important Information ..............................2 Warranty ...................................................2 Pre-Installation .........................................3 Planning Installation ..............................3 Tools and Hardware Required ...............3 Package Contents ..................................6 Installation ................................................7 Care and Cleaning ....................................10 Troubleshooting .............................
Pre-Installation PLANNING INSTALLATION ADVANCED INSTALLATION: Consult a plumber or professional before installing this product. Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service for replacement parts. All installations can vary depending on how your previous faucet was installed.
Pre-Installation (continued) B. IPS Measuring tape Tube cutter Adjustable wrench Phillips screwdriver Silicone sealant Key hole saw Thread sealant tape Flashlight Strap wrench Pipe wrench SI LI CO NE Safety goggles C.
Pre-Installation (continued) D. CPVC+COPPER COPPER COPPER Measuring tape Tube cutter Key hole saw Thread sealant tape Flashlight LI CO NE Safety goggles SI P i pe J o in t C o m p ou n d Adjustable wrench Phillips screwdriver Silicone sealant Strap wrench 5 CPVC cement P i pe J o in t C o m p ou n d CPVC cleaner HOMEDEPOT.COM/GLACIERBAY Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation (continued) PACKAGE CONTENTS A B C D G E F H J I Part Description Quantity A Shower flange 1 B Shower arm 1 1 C Shower head D Valve body 1 E Flange 3 F Handle 3 G Set screw 3 H Plug 1 I Tub spout 1 J 2.
Installation 1 Preparing for installation the supply 2 Installing connections CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle to relieve water pressure and ensure that the water is completely shut off. □ □ NOTE: Be sure to position the valve body (D) correctly in the wall, with the markings "UP" facing upward. Hot water supply lines go into the “H” inlet; cold water supply lines go into the “C” inlet.
Installation (continued) the tub and shower the water outlets and 3 Installing outlet connections 4 Flushing checking for leaks NOTE: Do not use PEX or CPVC between the valve body (D) and tub spout (I). □ Wrap thread sealant tape around the pipe threads in a clockwise direction, as shown. □ Connect the shower (1) and tub outlet pipes (2) to the valve body (D). Connect the pipe elbows (3) (not included) to the ends of both pipes, and tighten with a wrench.
Installation (continued) the shower flange, 5 Installing shower arm, and shower head 6 Installing the tub spout □ Insert the long end of the shower arm (B) through the shower flange (A), then wrap thread sealant tape around the long end of the shower arm (B) in a clockwise direction, as shown. □ Install the long end of the shower arm (B) into the pipe elbow inside the wall. The shower flange (A) should fit snug to the finished wall surface. □ Thread the shower head (C) onto the shower arm (B).
Installation (continued) 7 Installing the handle NOTE: Before proceeding, ensure the valves are closed. □ Position the flanges (E) on the valve body (D). □ Place the handles (F) onto the valve body (D) and tighten the set screw (G) with the Hex wrench (Hex: 2.5 mm, J) provided. D E F G E F 1 F E G G J Hot handle Cold handle Care and Cleaning □ To clean, wipe down with a damp cloth and dry with a towel.
Troubleshooting NOTE: Refer to the Service Parts section in this manual for a detailed drawing showing the location of the parts listed below. Problem Possible Cause Solution There is no flow or a low water flow. One or both water supplies are not turned on. □ Turn both water supply valves counterclockwise to the on position. There is leaking or dripping The grommets are not sealing properly. from the spout when the handle is closed. □ Replace the cartridge.
Service Parts 1 2 3 Faucet ID tags can be found on the hot side of the valve body 4 5 7 6 10 8 11 12 8 Part Description 9 Part Number Part 1 Shower flange RP38046* 7 Description Flange Part Number RP80387* 2 Shower arm RP38019* 8 Handle assembly H RP13585* 3 Shower head RP38301* 9 Handle assembly C RP13586* RP70620 4 Cartridge RP22018 10 Diverter 5 Bonnet nut RP70154* 11 Plug RP70153 6 Screw RP50209 12 Spout RP33090* *Specify Finish Many replacement cartrid
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
Modelo núm. HD834X-0001 SKU núm. 1002910935 GUÍA DE USO Y MANTENIMIENTO GRIFO PARA BAÑERA Y DUCHA, DE TRES LLAVES ¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY GRACIAS Apreciamos la confianza que has depositado en Glacier Bay al comprar este grifo para bañera y ducha.
Tabla de contenido Información importante .........................15 Garantía...................................................15 Pre-instalación .......................................16 Planificación de la instalación .............16 Herramientas y herrajes necesarios ....16 Contenido del paquete .........................19 Instalación ..............................................20 Cuidado y limpieza ................................23 Solución de problemas ...........................
Pre-instalación PLANIFICACIÓN DE LA INSTALACIÓN INSTALACIÓN AVANZADA: Consulta a un plomero o profesional antes de instalar este producto. Antes de comenzar la instalación de este producto, asegúrate de que no falta ninguna pieza. Compara las piezas con la lista de Contenido del paquete. Si falta alguna pieza o está dañada, no intentes instalar el producto. Comunícate con el servicio al cliente para piezas de repuesto.
Pre-instalación (continuación) B. IPS Cinta métrica Cortador de tuberías Llave ajustable Destornillador Phillips Sellador de silicona Serrucho de punta Cinta selladora para roscas Linterna Llave de correa Llave para tubería SI LI CO NE Gafas de seguridad C.
Pre-instalación (continuación) D. CPVC+COBRE COBRE COBRE Cinta métrica Cortador de tuberías Serrucho de punta Cinta selladora para roscas Linterna LI CO NE Gafas de seguridad SI P i pe J o in t C o m p ou n d Llave ajustable Destornillador Phillips Sellador de silicona Llave de correa 18 Cemento CPVC P i pe J o in t C o m p ou n d Limpiador CPVC HOMEDEPOT.COM/GLACIERBAY Para obtener asistencia, llama al 1-855-HD-GLACIER.
Pre-instalación (continuación) CONTENIDO DEL PAQUETE A B C D G E F H J I Pieza Descripción Cantidad A Brida de la ducha 1 B Brazo de la ducha 1 1 C Cabezal de la ducha D Cuerpo de la válvula 1 E Brida 3 F Llave 3 G Tornillo de fijación 3 H Tapón 1 I Caño de la bañera 1 J Llave hexagonal de 2.
Instalación prepararse para 1 Cómo la instalación instalar las conexiones 2 Cómo de suministro PRECAUCIÓN: Cierra siempre el suministro de agua antes de retirar un grifo existente o reemplazar alguna parte del mismo. Abre la llave del grifo para liberar la presión de agua y asegúrate de que el suministro de agua esté completamente cerrado. □ □ NOTA: Asegúrate de colocar el cuerpo de la válvula (D) correctamente en la pared, con la marca "UP" hacia arriba.
Instalación (continuación) instalar las conexiones Cómo purgar las salidas 3 Cómo de salida de la bañera y la de agua y chequear que no 4 ducha haya fugas NOTA: No uses PEX ni CPVC entre el cuerpo de la válvula (D) y el caño de la bañera (I). □ □ Coloca cinta selladora para roscas alrededor de las roscas de la tubería en dirección de las manecillas del reloj, tal como muestra el diagrama anterior.
Instalación (continuación) el brazo de la ducha 5 ducha, y el cabezal de la ducha 6 bañera Cómo instalar el caño de la Cómo instalar la brida de la □ Inserta el extremo largo del brazo de la ducha (B) a través de la brida de esta (A) y coloca enseguida cinta selladora para rosca alrededor de aquel (B), en el sentido de las manecillas del reloj, tal como se muestra. □ Coloca el extremo largo del brazo de la ducha (B) dentro del codo de tubería que está dentro de la pared.
Instalación (continuación) 7 Cómo instalar la llave NOTA: Antes de continuar, asegúrate de que las válvulas estén cerradas. □ Coloca las bridas (E) sobre el cuerpo de la válvula (D). □ Coloca la llaves (F) en el cuerpo de la válvula (D) y aprieta el tornillo de fijación (G) con la llave hexagonal (hexagonal de 2.5 mm, J) incluida. D E F G E F 1 F E G G J Llave de agua caliente Llave de agua fría Cuidado y limpieza □ Para limpiar, usa un paño húmedo y seca con una toalla.
Solución de problemas NOTA: Consulta en la sección de piezas de repuesto de este manual una ilustración detallada sobre la ubicación de las piezas enumeradas más abajo. Problema Posible causa Solución No hay flujo de agua o es insuficiente. Una o ambas líneas de suministro de agua están cerradas. □ Gira las válvulas de suministro de agua hacia la izquierda hasta la posición de “abierto”. Hay una fuga o filtración desde el caño cuando la manija está cerrada.
Piezas de repuesto 1 2 Las etiquetas de identificación del grifo pueden encontrarse en el lado de agua caliente del cuerpo de la válvula 3 4 5 7 6 10 8 11 12 8 Pieza Descripción 9 Número de pieza Pieza Descripción Número de pieza 1 Brida de la ducha RP38046* 2 Brazo de la ducha RP38019* 3 Cabezal de la ducha RP38301* 4 Cartucho RP22018 5 Tuerca del bonete RP70154* 10 Desviador RP70620 6 Tornillo RP50209 11 Tapón RP70153 7 Brida RP80387* 12 Caño RP33090* *Espec
¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Conserva este manual para uso futuro.