Installation Guide

Table Of Contents

Installation (continued)

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Adjusting the temperature

Reinstalling the inverter and

sleeve

□ Place the inverter (2) onto the valve body (D)

and rotate the inverter (2) with the arrow side

facing down. Then secure with the screw (3).

□ Screw the sleeve (4) onto the valve body (D).

NOTE: Rotate the cartridge stem (1) clockwise to turn off

the water before you install the handle.

Adjusting the desired maximum

water temperature

□ For colder water, adjust the red limit stop ring (1) in a clockwise direction and reinstall the red limit stop

ring (1) onto the cartridge assembly (2).

□ For hotter water, adjust the red limit stop ring (1) in a counterclockwise direction and reinstall the red

limit stop ring (1) onto the cartridge assembly (2).

NOTE: A thermometer (not included) can be held in the

running water to aid in reaching the desired water

temperature.

For hotter waterFor colder water