Installation Guide

Installation (continued)

Installing the shower head

□ Attach the shower head (C) to the shower arm

(B). Carefully tighten the shower head (C) with

a clean strap wrench.

Checking for leaks

□

Turn the handle (F) to the full on mixed position.

When the valve body (D) is turned on, water

normally ows through the tub spout (J). To

activate the shower, turn the valve on and pull

the knob (1) up. Hold the knob (1) until the water

ows continuously from the shower arm (B).

Check for leaks.

Shut off the water at the faucet and supply lines. □

Care and Cleaning

□ To clean, wipe down with a damp cloth and dry with a towel.

□ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will

be voided.

FOR

SHOWER