Installation Guide

Installation (continued)

Installing the plaster guard

Place the plaster guard (L) onto the valve body (D)

and secure with the screws (K).

□

Flushing the water outlets

□

and checking for leaks

Place the handle (F) on the valve body (D)

inverter and turn the handle (F) to the full on

mixed position. Turn on the hot and cold water

supply lines and allow the water to ow from

the outlets for one minute, or until all foreign

matter has been ushed out. Check for leaks.

Shut off the water at the faucet and supply

lines. Remove the handle (F).

□

NOTE: Be sure to position the plaster guard (L) correctly

onto the valve body (D), with the side marked "SHOWER"

facing upward.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.