Installation Guide

7 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
3
Installing the Door Pulls
Place a door pull (BB) over the pre-drilled holes on the right
door and secure to the door using the included bolts.
Repeat for remaining door pull (BB).
4
Adjusting the Levelers
NOTE: Clean area where the cabinet will be permanently
located prior to beginning installation, ensuring the cabinet
will not interfere with any water supply and drain lines
once mounted.
With the help of another adult, carefully place cabinet
Find and mark locations of wall studs behind the
permanent location of cabinet.
From inside cabinet, drill hole through cabinet mounting
area into wall studs.
Using mounting hardware (not included) appropriate for
your installation site, secure cabinet to wall stud. If possible,
secure cabinet to two wall studs for increased stability.
WARNING:
Cabinet MUST be secured to wall studs.
NOTE: Use preassembled levelers on feet of cabinet base
to level the item. Twisting the levelers counterclockwise
will increase the height of cabinet base, twisting them
clockwise will decrease it.
BB