Installation Guide

7 HOMEDEPOT.COM
Please contact 1-855-434-5224 for further assistance.
Installation (continued)
7
Connecting the water supply line
8
Installing the seat with lid
□ Connect the water supply line (not included) between the
tank (A) and shut-off valve.
□ Tighten the tank connection coupling nut ¼ turn bey
ond
hand tight.
□ Turn on the supply valve and allow the tank (A) to fill.
□ Check for leakage at all connections and tighten or correc
t
as needed.
NOTE: Do not overtighten the tank connection.
□ Turn the toilet seat with lid (C) upside-down.
□ Insert the lock bolt (NN) in the bolt trough (1), then adjust
the lock bolt (NN) to make the hole distance match with the
toilet.
□ Turn the toilet seat with lid (C) over so that the lock bolts
(NN) protrude downward.
□ Insert the lock bolts (NN) into the holes on the toilet (B) and
adjust the toilet seat and lid (C) to find the best assembly
position.
□ Place the washer (OO) and the lock nut (PP) onto the l
ock
bolt (NN) from underneath the toilet (B) and tighten the lock
nut (PP) firmly to secure the seat and lid (C) in place on the
toilet (B).