Model# RP90103 OMSID# 206126180 INSTALLATION AND CARE GUIDE SOAP DISPENSER 9/2016 REV.
Installation 1 Preparing for installation □ the soap assembly 2 Installing shank Remove the soap bottle (1) and soap dispenser mounting nut (2). Separate the soap pump (3) from the soap assembly shank (4). Do not lose the washer (5). □ Ensure the washer (1) is bottom the soap assembly shank (2). □ Insert the soap assembly shank (2) through the selected hole in the sink. □ Secure the soap assembly shank (2) to the sink with the soap dispenser mounting nut (3) provided.
Installation (continued) 3 Installing the soap bottle □ 4 □ From under the sink, screw the soap bottle (1) onto the soap assembly shank (2). Pouring in the soap Pour in the soap (not included) into the shank orifice. 2 1 5 Installing the soap pump □ 1 Insert the soap pump (1) down into the soap assembly shank (2).