Installation Guide

1
Installation
2
Installing the soap assembly
shank
□ Ensure the washer (1) is bottom the soap
assembly shank (2).
□ Insert the soap assembly shank (2) through the
selected hole in the sink.
□ Secure the soap assembly shank (2) to the sink
with the soap dispenser mounting nut (3)
provided. Push up the soap dispenser mounting
nut (3) to sink and hand-turn to tighten, as
shown in the Fig 1.
1
Preparing for installation
□ Remove the soap bottle (1) and soap dispenser
mounting nut (2). Separate the soap pump (3)
from the soap assembly shank (4). Do not lose
the washer (5).
1
2
5
4
3
1
2
3
Push
up
Screw
T
Sink
Sink
Fig 1