Installation Guide

Use and Care Guide
Tri-view Bath Storage Cabinet
TOOLS REQUIRED
Claw hammer Safety goggles Phillips screwdriver Power drill
Measuring tape Wall hardware Level
Item #1000 952 272
Item #1000 265 860
Item #1000 952 286
Item #1000 246 603
Model # T24-11-B
Model # T24-WH-B
Model # T30-11-B
Model # T30-WH-B
HARDWARE INCLUDED
(depending on model)
AA - Shelf Clip
x 8
BB - Shelf
x 2
3
INSTALLING THE CABINET
□ For wall stud installation, insert #12 x 3 in. screws with
washers into the stud locations (not included).
□ For drywall installation, drill holes at the appropriate
locations and insert toggle bolts with washers (not
included).
□ For concrete wall installation, drill 1/4 in. holes at the
appropriate locations and insert #12 wall anchors,
followed by #12 x 3 in. screws (not included).
2
PRE-DRILLING THE BACK OF THE CABINET
□ Drill 1/8 in. diameter holes through the back
panel of the cabinet
Installation
1
DETERMINING THE MOUNTING LOCATION
NOTE: Before installing, make sure all parts are
present. Compare parts with the Hardware Included
list. If any part is missing or damaged, do not attempt
to install the product.
□ Determine the desired mounting location, and
mark the wall where the unit will be installed.
4
INSTALLING THE SHELVES
□ Insert the provided shelf clips into the holes on the
inside of the cabinet.
□ Rest the shelf on the shelf clips.
AA
BB
HOMEDEPOT.COM
Please contact 1-888-774-8062 for further assistance.