Installation Guide

3 HOMEDEPOT.COM
Please contact 1-855-HDGLACIER for further assistance.
Pre-Installation
PLANNING INSTALLATION
Before installation, verify the cabinet clearance:
Compare all parts with the Hardware Included and Package Contents lists in this manual. Check the surface of the sink for any aws or
damage, including dents, bends, bumps, or scuff marks. If any damage is noticed or parts are missing, do not proceed with the installation.
Contact the Customer Service Team at 1-855-434-5224 or visit www.HomeDepot.com.
NOTE: You may choose to install this sink either undermount (from below the counter) or topmount (from above the counter).
TOOLS REQUIRED
Measuring
tape
Safety
goggles
Phillips
screwdriver
Pencil Hacksaw
Saber saw
or Jig saw
Electric
drill
Wrenches
Silicone
sealant
Flathead
screwdriver
11 mm
drill bit
HARDWARE REQUIRED (NOT INCLUDED)
Description Quantity
65 mm undermount clips 8
50 mm undermount clips 4