Installation Guide
5 HOMEDEPOT.COM
Please contact 1-855-HDGLACIER for further assistance.
Topmount Installation
1
Preparing the countertop
□ Place the topmount side of the template (B) on the
countertop. Ensure the template (B) is centered on the
counter so that it is parallel to the counter edge and that
the installation hole will not interfere with the structure of
the cabinet.
□ Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) with a pencil.
B
2
Cutting the installation hole
□ Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
3
Preparing the sink
□ Place the sink (A) into the installation hole to verify the t.
Adjust the cutout if necessary.
□ Place the sink (A) upside down and align the bottom edge
with waterproong strip.
A
4
Attaching the mounting clips
□ Attach the topmount clips (AA) at the corners of the sink
(A) and space the rest evenly around the underside of the
sink(A).
A
AA