Installation Guide

6
Topmount Installation
5
Installing the sink
□ Apply silicone sealant (not included) around the underside
and lip of the sink (A).
□ Carefully lower the sink (A) into the counter.
□ Tighten the screws on the topmount clips (AA) evenly until
the sink (A) is ush with the counter. Do not over-tighten.
□ Wipe excess sealant with a rag.
A
A
AA
A
AA
6
Installing the strainer assembly
□ Apply a small amount of plumber’s putty (not included) in
the notch around the drain hole of the sink (A).
□ Place the strainer ring (E) on top of the drain hole in the
sink (A).
□ Insert the screener (C) into the bowl (D) and place this
assembly into the drain hole in the sink (A).
□ From underneath the sink (A), place the rubber washer
(F), paper washer (G), locknut (H), plastic joint (I), and
connecting nut (J) over the drain hole in the sink (A).
Tighten the locknut (H) and connecting nut (J) to hold the
strainer assembly securely in place.
A
C
D
F
G
H
I
J
E
7
Installing the faucet and soap
dispenser
□ Install the faucet and soap dispenser according to the
installation instructions for these items.
□ When nished, place the basket (K) and sink grid (L) into
the sink.
L
K