Installation Guide

Securing the faucet assembly
Installing the faucet assembly
5
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Shut off the water supply.
Insert the faucet body (L) through the hole in the
sink.
L
From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (O). Push the FastMount™ system (O)
up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise)
to tighten (Fig 1).
O
Push
up
O
O
2
Sink
Screw
Sink
3
Sink
Push
up
O
11
Fig 1
HOMEDEPOT.COM/GLACIERBAY
Top Mount Installation (Continued)
7