MSDS

Material Safety Data Sheet
according to ANSI Z400.1- 2004 and 29 CFR 1910.1200
GLADE® AUTOMATIC AEROSOL SPRAY - CLEAN LINEN™
Version 1.2
Print Date 12/02/2010
Revision Date 05/28/2010 MSDS Number 350000014838
SITE_FORM Number
30000000000000011426.001
2/9
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous chemicals present at or above reportable levels as defined by OSHA 29 CFR 1910.1200 or
the Canadian Controlled Products Regulations are listed in this table:
Chemical Name CAS-No. Weight percent
Isobutane 75-28-5 30.00 - 60.00
Acetone 67-64-1 10.00 - 30.00
Naphtha (petroleum),
hydrotreated heavy
64742-48-9
10.00 - 30.00
Distillates (petroleum),
hydrotreated middle
64742-46-7
5.00 - 10.00
Propane 74-98-6 5.00 - 10.00
Fragrance - Trade Secret Mixture 1.00 - 5.00
For additional information on product ingredients, see www.whatsinsidescjohnson.com.
4. FIRST AID MEASURES
Eye contact : Flush immediately with plenty of water for at least 15 to 20
minutes. Get medical attention if irritation develops and
persists.
Skin contact : Wash off with soap and water. Get medical attention if irritation
develops and persists.
Inhalation : Remove to fresh air. If breathing is affected, get medical
attention.
Ingestion : Do NOT induce vomiting. Never give anything by mouth to an
unconscious person. Get medical attention immediately. If
swallowed, call a poison control centre or doctor immediately.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing
media
: Alcohol foam, carbon dioxide, dry chemical, water fog
Specific hazards during fire
fighting
: Aerosol Product - Containers may rocket or explode in heat of
fire.
Further information : Fight fire from maximum distance or protected area. Cool and
use caution when approaching or handling fire-exposed