MSDS
Scentco, LLC – 93 Genesis Pkwy – Thomasville, GA 31792: Phone 877-723-6826 Fax 229-228-6137
PRECAUTIONS FOR SAFE HANDLING
Spills: Eliminate all ignition sources. Ventilate area. Avoid inhalation of
Product or use approved respiratory devices. Cover with an inert
Absorbent and remove to an approved disposal container. Report
Spill to appropriate authorities if required.
Water Disposal Methods: Place Material and absorbent into sealed containers and dispose of in
Accordance with current applicable laws and regulations.
Handling and storage
Precautions: Store in a cool, dry, ventilated area, away from any sources of ignition.
Keep containers tightly closed and upright when not in use.
PERSONAL PROTECTION
Eyes: use goggles or face shield if eye contact might occur
Clothing: the use of chemically resistant gloves is recommended
Respiratory: none generally required. In poorly ventilated areas wear niosh
approved respirator.
Ventilation: provide adequate ventilation. Use exhaust fan if necessary.
Work practices: avoid inhalation and contact with eyes and skin. Wash after any
Contact, before breaks and meals. Contaminated clothing should be
cleaned before reuse.
STORE AT 60-85 DEGREES F.
Mix/Shake well before using
DISCLAIMER
The information in this MSDS was obtained from current and reliable sources. However, the data is
provided without any warranty, expressed or implied, regarding its correctness or accuracy. Since the
conditions of handling, storage and disposal of this product are beyond our control, it is the
responsibility o f the user both to determine safe conditions for use of this product and to assume full
responsibility for loss, injury and expense arising out of the products improper use. No warranty
expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any
statement in this MSDS. Various government agencies may have specific regulations regarding the
transportation, handling, storage, use or disposal of this product which may not be covered in this
MSDS. The user is responsible for full compliance.