Manualshelf

Installation Guide

ManualsBrandsGladiator Garageworks ManualsGarage StorageGearTrack 48" Long Channels (Pack of 2) with 10-Year Limited Warranty, Holds up to 100 lbs. Per Linear Foot in Grey
12345678910
5
6. Repeat for Additional Channels
7. Channel Spacing 8. Install Ends Caps (sold seperately)
■ Repeat this process for the next desired application area.
NOTE: If channels are to be used to support accessory
hooks and/or small item bins, they may be spaced in
any way desired. If channels are being used to support
Gladiator
®
Wall GearBoxes, they must be installed
18" (46 cm) apart.
■ From the front, snap the end cap onto each end of the
run of GearTrack
®
Channel.
■ Make sure all screws are installed and ush with the channel.
A
B
C
D
E
A. Drywall
B. Wooden stud
C. Flat-head screw in
every slot at every stud
D. 1" (2.54 cm) min. to 1¼"
(3.17 cm) max. if near wiring
E. 1/4" (6.3 mm)
5. Inspect Screw Installation
BUBBLE LEVEL
18" (46 cm)