Installation Instructions

Install the Horizontal Bike Hook

■ When not in use, bike hook may be rotated to the side so it

lies at against the bracket.

1. Engage the bracket rims on the horizontal bike hook into the

slots in the GearWall

panel or GearTrack

channel by lifting

up, pushing toward the wall and lowering the rims into the

slots.

2. Inspect the bracket from the side to ensure the rims are fully

engaged in the slots as shown.

Install the Storage Bin Holder

■ Designed to be used as a pair, the bin holders will support

one storage bin up to a maximum 18 gallon size.

1. Measure the length of the storage bin 4” (10.2 cm) to

5” (12.7 cm) from the bottom.

2. Install the storage bin holders into the slots in the GearWall

panel or GearTrack

channel so that distance between the top

of the holders is the same as the length of the storage bin.

NOTE : Engage the bracket rims into the slots by lifting up,

pushing toward the wall and lowering the rims into the slots.

3. Inspect the bracket from the side to ensure the rims are fully

engaged in the slots as shown.

4. Set the storage bin into the bin holders so that the bottom

and sides are supported by the storage bin holders.

Horizontal Bike Hook

Storage Bin Holder

WARRANTY

For warranty information:

In U.S.A. call 1-866-342-4089 or visit our website at

www.GladiatorGW.com

In Canada call 1-800-807-6777 or visit our website at

www.gladiatorgarageworks.ca

There are many benets for registering the product. Find out more and register the product online at www.gladiatorgarageworks.com.