Instructions / Assembly

SCREWDRIVER

HAMMER

SELF-PREPARED TOOLS: Tools below are NOT included in package.

Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .

Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .

Before you begin, please follow assembly instructions carefully, then follow them step by step.

Reminder:

Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.

PART LIST

SHELF PANEL

QTY

HARDWARE

METAL SIDE

MODEL : ASSEMBLY INSTRUCTIONS

PAGE: /3

ALLEN KEY M4

1 PC

4 PCS

20 PCS

5 PCS

2 PCS

METAL PLATE

JCBC SCREW M6 x 15MM

JCBC SCREW M6 X 30MM

TIPPING PACK WITHOUT AI

2 SETS

POWER DRILL

GHDSV-1459

PAGE 1
ASSEMBLY INSTRUCTIONS PAGE: 1/3 MODEL : GHDSV-1459 Before you begin, please follow assembly instructions carefully, then follow them step by step. Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling . Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
PAGE 2
ASSEMBLY INSTRUCTIONS PAGE: 2/3 STEP 1 HARDWARE A - Connect Metal Side (2) to panel (1) by using hardware A and C. (Repeat 20 times.) MODEL : GHDSV-1459 STEP 2 HARDWARE A - Connect Metal Plate (3) to Metal Side (2) by using hardware A and B. (Repeat 4 times.
PAGE 3
ASSEMBLY INSTRUCTIONS PAGE: 3/3 STEP 3 SCREWDRIVER REQUIRED - Assemble hardware D1 into panel (1) by using hardware D2. (Repeat 2 times.) 1 D1 1 STEP 4 POWER DRILL REQUIRED - Mark and use the power drill to drill a hole on the wall. - Hit hardware D3 into the wall. (Repeat 2 times.) HAMMER REQUIRED 1 x2 D2 2 MODEL : GHDSV-1459 D3 1 x2 2 HIT ROTATE 1 1 2 3 3 2 1 1 1 1 STEP 5 SCREWDRIVER REQUIRED - Assemble hardware D1 to D3 by using hardware D4. (Repeat 2 times.