Instructions / Assembly

ManualsBrandsGlamour Home ManualsBookcasesAugust 71.5 in. Light Brown Weathered Oak Particle Board 5- -Shelf Modern Etagere Metal Frame Bookcase with Drawers

SCREWDRIVER

HAMMER

SELF-PREPARED TOOLS: Tools below are NOT included in package.

Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .

Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .

Before you begin, please follow assembly instructions carefully, then follow them step by step.

Reminder:

Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.

PART LIST

TOP TRAY

MINI FIX

SIDE PANEL (L)

SIDE PANEL (R)

QTY

HARDWARE

6 SETS

ALLEN KEY M4

1 PC

BOTTOM PANEL

M6 X 5OMM

CSK CAP WOOD SCREW

M8 X 30MM WOOD DOWEL

12 PCS

MODEL : ASSEMBLY INSTRUCTIONS

PAGE: /6

6 PCS

24 PCS

8 PCS

1 PC

M3.5 X 16MM C.B SCREW

48 PCS

30 PCS

16 PCS

24 PCS

DRAWER FRONT (L)

DRAWER FRONT (R)

BACK PANEL

CENTER PANEL

DRAWER BOTTOM

14" DRAWER SLIDE

K1 ( L/R )

K2 ( L/R )

5/8 NAIL

2 SETS

1 PC

2 PCS

M4 X 38MM C.B SCREW

DRAWER SIDE

DRAWER BACK

4 PCS

2 PCS

JCBC SCREW M6 X 30MM

JCBC SCREW M6 X 40MM

RING HANDLE

TOP PANEL

SHELF PANEL

1 PC

12 PCS

2 PCS

METAL SIDE

METAL SUPPORT

3 PCS

POWER DRILL

TIPPING PACK WITHOUT AI

2 SETS

GHDSV-1461

Summary of content (6 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS PAGE: 1/6 MODEL : GHDSV-1461 Before you begin, please follow assembly instructions carefully, then follow them step by step. Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling . Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
PAGE 2
ASSEMBLY INSTRUCTIONS PAGE: 2/6 STEP 1 SCREWDRIVER REQUIRED - Insert hardware A2 onto panel (2). (Repeat 6 times.) - Connect Metal Support (15) to panel (2) by using hardware D and H. (Repeat 8 times.) HARDWARE D A2 MODEL : GHDSV-1461 STEP 2 HARDWARE D - Connect Metal Support (15) to panel (1) and (3) by using hardware D and H. (Repeat 16 times.
PAGE 3
ASSEMBLY INSTRUCTIONS PAGE: 3/6 STEP 5 SCREWDRIVER REQUIRED - Fix hardware K1 (L) into panel (5) and (7) with hardware E. (Repeat 3 times for each hardware.) K1(L) MODEL : GHDSV-1461 STEP 6 SCREWDRIVER REQUIRED - Fix hardware K1 (R) into panel (6) with hardware E. (Repeat 3 times for each hardware.) 7 6 5 K1(R) Panel (7) right face K1(L) E E x2 x2 x2 ROTATE ROTATE x1 Third hole from the edge. STEP 7 SCREWDRIVER REQUIRED - Fix hardware K1 (R) into panel (7) with hardware E.
PAGE 4
ASSEMBLY INSTRUCTIONS PAGE: 4 /6 STEP 9 HARDWARE D - Connect panel (3) to panel (5), (6) and (7) by using hardware C and D. (Repeat 6 times.) MODEL : GHDSV-1461 STEP 10 HAMMER REQUIRED - Assemble panel (8) to panel (2) and (3) with hardware G. (Repeat 14 times.) G 6 8 HIT 2 7 C 3 x6 x14 3 2 ROTATE 5 D 5 * In this step hardware B are pre-inserted. STEP 11 HARDWARE D - Connect Metal Side (14) to Metal Support (15) by using hardware D and I. (Repeat 24 times.
PAGE 5
ASSEMBLY INSTRUCTIONS PAGE: 5/6 STEP 13 HAMMER REQUIRED - Assemble panel (13) to entire body with hardware G. (Repeat 16 times.) MODEL : GHDSV-1461 STEP 14 K2 (L) K2 (L) 13 12 13 12 13 12 11 11 11 x16 K2 (R) K2 (R) G HIT SCREWDRIVER REQUIRED - Assemble hardware K2 (L/R) to panel (13) by using hardware E. (Repeat 3 times for each hardware.) 12 10 12 10 12 E 13 12 11 x4 9 12 E E x4 x4 ROTATE ROTATE ROTATE Third hole from the edge. Hole at the center.
PAGE 6
ASSEMBLY INSTRUCTIONS PAGE: 6/6 STEP 17 SCREWDRIVER REQUIRED - Assemble hardware L1 into panel (1) by using hardware L2. (Repeat 2 times.) 1 L1 4 STEP 18 POWER DRILL REQUIRED - Mark and use the power drill to drill a hole on the wall. - Hit hardware L3 into the wall. (Repeat 2 times.) x2 HIT 4 ROTATE 4 2 2 8 9 STEP 19 SCREWDRIVER REQUIRED - Assemble hardware L1 to L3 by using hardware L4. (Repeat 2 times.