Instructions / Assembly

ASSEMBLY INSTRUCTIONS
Read this instruction carefully. See hardware and Furniture part list for guidance.
Be sure all parts are complate, before you assemble. Pace all wooden prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS: 1. Do not FULLY- TIGHTEN the nut or bolt until all nut and bolt is ready assembled.
2. Do not OVER - TIGHTEN the nut or bolt avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE: THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 01
PAGE 1 OF 1
PART LIST
ITEM DESCRIPTION
QTY
A
SIDE RAIL (L & R)
2 PCS
B STRETCHER 2 PCS
C FRONT STAND 1 PC
D BACK STAND 1 PC
E CUSHION SEAT 1 PC
HARDWARE LIST
ITEM DESCRIPTION
QTY
1 WOOD DOWEL M8 x 30mm 8 PCS
2
JCBC SCREW M6 x 50mm 4 PCS
3 SPRING WASHER M6 4 PCS
4
FLAT WASHER M6 x 19mm
4 PCS
5
ALLEN KEY M4
1 PC
6
CSK SCREW M4 x 32mm
7 PCS
FULLY SET-UP (STOOL)
STEP 03 STEP 04
A
STEP 02
(L)
This side is back
A
(R)
1
Step (A)
Step (B)
(R)
(L)
D
A
C
2
5
3
4
B
C
6
6
6
E
When assembly if the stretcher
have remark an marking hole
then should put at front stand.