User manual

46
5.13 LCD25 Parameters
A> Check Digit Transmission
<Do Not Calculate
Check Digit>
Calculate Check Digit
& Transmit
Calculate Check
Digit & Not Transmit
B> Setup Code Length
To set the fixed length:
1. Scan the "Begin" label of the desired set.
2. Go to the Decimal Value Tables in Appendix A,
scan label(s) that represents the length to be
read.
3. Scan the "Complete" label of the desired set.
Repeat the steps 1 - 3 to set additional lengths.
%0QN3
%0QN7
%0QN5