Specification

ManualsBrandsGlasliner ManualsBoards, Planks & Panels4 ft. x 8 ft. White .090 FRP Wall Board

FRP Wall & Ceiling Liner Panels

097700 - 1

Stabilit America, Inc., dba Glasteel June 2005

285 Industrial Drive

Moscow, Tennessee 38057

Toll Free (800) 238-5546

Phone (901) 877-3010

Fax (901) 877-1388

Web Site www.glasteel.com

Product Guide Specification

Specifier Notes: This product guide specification is written according to the Construction

Specifications Institute (CSI) 3-Part Format, as described in The Project Resource Manual—CSI

Manual of Practice.

The section must be carefully reviewed and edited by the Architect to meet the requirements of the

project and local building code. Coordinate this section with other specification sections and the

Drawings. Delete all “Specifier Notes” when editing this section.

SECTION 097700

FRP WALL AND CEILING LINER PANELS

Specifier Notes: This section covers Glasteel™ Glasliner FRP general-purpose and fire-retardant

interior wall and ceiling liner panels. Consult Glasteel for assistance in editing this section for the

specific application.

PART 1 GENERAL

1.1 SECTION INCLUDES

Specifier Notes: Specify general-purpose or fire-retardant Glasliner FRP liner panels.

A. Fiberglass reinforced plastic (FRP), [general-purpose] [fire-retardant], interior wall and ceiling

liner panels.

1.2 RELATED SECTIONS

Specifier Notes: Edit the following list of related sections as required for the project. List other

sections with work directly related to this section.

A. Section 07920 (07 92 00) - Joint Sealants.

Summary of content (6 pages)

PAGE 1
Stabilit America, Inc., dba Glasteel 285 Industrial Drive Moscow, Tennessee 38057 Toll Free (800) 238-5546 Phone (901) 877-3010 Fax (901) 877-1388 Web Site www.glasteel.com June 2005 Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, as described in The Project Resource Manual—CSI Manual of Practice.
PAGE 2
1.3 REFERENCES Specifier Notes: List standards referenced in this section, complete with designations and titles. This article does not require compliance with standards, but is merely a listing of those used. A. ASTM C 367 - Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels. B. ASTM D 256 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics. C.
PAGE 3
E. 1.5 A. 1.6 Warranty: Submit manufacturer's standard warranty. QUALITY ASSURANCE Manufacturer’s Qualifications: 1. FRP wall and ceiling liner panels manufactured in ISO 9002 certified facility. 2. More than 45 years experience 3. Panels and moldings originate from the same manufacturer. DELIVERY, STORAGE, AND HANDLING A. Storage: 1. Store liner panels in clean, cool, dry, well-ventilated area indoors in accordance with manufacturer's instructions. 2. Store liner panels flat. 3.
PAGE 4
Specifier Notes: Specify Glasliner FRP liner panel dimensions. a. b. Wall Liner Panels: [4 feet by 8 feet] [4 feet by 9 feet] [4 feet by 10 feet] [4 feet by 12 feet]. Ceiling Liner Panels: [23-3/4 inches by 23-3/4 inches] [23-3/4 inches by 47-3/4 inches]. Specifier Notes: Specify Glasliner FRP liner panel finish. Consult Glasteel for more information. 6. Finish: [Traditional pebbled, textured one side (TOS)] [Premium gel-coat, smooth both sides (SBS)].
PAGE 5
8. 9. 10. 11. 12. 13. 14. D. 2.3 Coefficient of Linear Thermal Expansion, ASTM D 696: 2.39 x 10-5 inches/inch/degree F. Barcol Hardness, ASTM D 2583: 35 average. Specific Gravity, ASTM D 792: 1.5743. Abrasion Resistance, Tabor Weight Loss: 0.391 percent weight loss. Flash Ignition Temperature, ASTM D 1929: 400 degrees C. Self Ignition Temperature, ASTM D 1929: 430 degrees C. Surface Burning Characteristics, ASTM E 84: a. Flame Spread Index: 25. b. Smoke Developed Index: Less than 450.
PAGE 6
D. Lay out liner panels to minimize joints. Use full panels where possible. E. Cut liner panels in accordance with manufacturer's instructions for proper installation. F. Expansion and Contraction: 1. Install liner panels with gap at ceiling, floor, and between panels in accordance with manufacturer's instructions to allow for expansion and contraction of panels due to changes in temperature. 2.