Specification

FRP Wall & Ceiling Liner Panels 097700 - 2
1.3 REFERENCES
Specifier Notes: List standards referenced in this section, complete with designations and titles. This
article does not require compliance with standards, but is merely a listing of those used.
A. ASTM C 367 - Standard Test Methods for Strength Properties of Prefabricated Architectural
Acoustical Tile or Lay-In Ceiling Panels.
B. ASTM D 256 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of
Plastics.
C. ASTM D 570 - Standard Test Method for Water Absorption of Plastics.
D. ASTM D 638 - Standard Test Method for Tensile Properties of Plastics.
E. ASTM D 696 - Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics
Between -30 Degrees C and 30 Degrees C With a Vitreous Silica Dilatometer.
F. ASTM D 790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced
Plastics and Electrical Insulating Materials.
G. ASTM D 792 - Standard Test Methods for Density and Specific Gravity (Relative Density) of
Plastics by Displacement.
H. ASTM D 1929 - Standard Test Method for Determining Ignition Temperature of Plastics.
I. ASTM D 2583 - Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a
Barcol Impressor.
J. ASTM D 3841 - Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels.
K. ASTM E 84 - Surface Burning Characteristics of Building Materials.
L. ICC Evaluation Service ES Report ESR-2364.
1.4 SUBMITTALS
A. Comply with Section 01330 (01 33 00) - Submittal Procedures.
B. Product Data: Submit manufacturer's product data, including installation instructions.
C. Samples: Submit manufacturer's samples.
1. Color Samples: Standard and special colors.
2. Liner Panels: Minimum 4 inches by 4 inches.
3. Moldings: Each type specified.
4. Fasteners: Each type specified.
D. Manufacturer's Certification:
1. Submit manufacturer's certification that materials comply with specified requirements and
are suitable for intended application.
2. Submit evidence of manufacturer’s ISO 9002 facility certification.