Specification

ManualsBrandsGlasliner ManualsBoards, Planks & Panels4 ft. x 8 ft. White .090 FRP Wall Board

FRP Wall & Ceiling Liner Panels

097700 - 4

Specifier Notes: Specify Glasliner FRP liner panel dimensions.

a. Wall Liner Panels: [4 feet by 8 feet] [4 feet by 9 feet] [4 feet by 10 feet] [4 feet by 12

feet].

b. Ceiling Liner Panels: [23-3/4 inches by 23-3/4 inches] [23-3/4 inches by 47-3/4

inches].

Specifier Notes: Specify Glasliner FRP liner panel finish. Consult Glasteel for more information.

6. Finish: [Traditional pebbled, textured one side (TOS)] [Premium gel-coat, smooth both

sides (SBS)].

Specifier Notes: Specify Glasliner FRP liner panel color. Consult Glasteel for availability of special-

order colors. The SBS finish (Gel-Coat) is only available in Bright White.

7. Color:

a. Wall Liner Panels: [Bright White] [Almond] [Beige] [Light Gray] [Ivory] [Silver]

[Black].

b. Ceiling Liner Panels: Bright White.

Specifier Notes: Specify physical properties for Series 1200, Glasliner FRP Class C general-purpose

wall liner panels or Glasliner FRP Class A fire-retardant wall liner panels.

B. Physical Properties, Series 1200, Glasliner FRP Class C General-Purpose Wall Liner Panels:

1. Flexural Strength, ASTM D 790: 17,000 psi.

2. Flexural Modulus, ASTM D 790: 6.0 x 10

psi.

3. Tensile Strength, ASTM D 638: 8,000 psi.

4. Tensile Modulus, ASTM D 638: 9.43 x 10

psi.

5. Elongation, ASTM D 638: 1.20 percent.

6. Water Absorption, ASTM D 570, 21 Degrees C at 72 Hours: 0.17 percent.

7. Izod Impact Strength, ASTM D 256: 7.0 foot-pounds/inch.

8. Coefficient of Linear Thermal Expansion, ASTM D 696: 2.22 x 10

-5

inches/inch/degree F.

9. Barcol Hardness, ASTM D 2583: 30 average.

10. Specific Gravity, ASTM D 792: 1.6138.

11. Abrasion Resistance, Tabor Weight Loss: 0.293 percent weight loss.

12. Flash Ignition Temperature, ASTM D 1929: 430 degrees C.

13. Self Ignition Temperature, ASTM D 1929: 450 degrees C.

14. Surface Burning Characteristics, ASTM E 84:

a. Flame Spread Index: 200.

b. Smoke Developed Index: Less than 450.

C. Physical Properties, Series 1200, Glasliner FRP Class A Fire-Retardant Wall Liner Panels:

1. Flexural Strength, ASTM D 790: 10,000 psi.

2. Flexural Modulus, ASTM D 790: 3.1 x 10

psi.

3. Tensile Strength, ASTM D 638: 7,000 psi.

4. Tensile Modulus, ASTM D 638: 3.1 x 10

psi.

5. Elongation, ASTM D 638: 1.80 percent.

6. Water Absorption, ASTM D 570, 21 Degrees C at 72 Hours: 0.72 percent.

7. Izod Impact Strength, ASTM D 256: 7.16 foot-pounds/inch.