Return Shower Installation Guide (Hinge Panel Style)
BEFORE YOU START The most fragile parts of tempered glass panels are the corners. Therefore, it is critical you have the rubber blocks in place so the glass never touches the tile surface you are installing onto. Please make sure the glass is always on blocks while out of the packaging prior/during install.
a. Using a ¼” tile drill bit drill the 2 holes on wall and 1 hole on the floor. b. Insert the wall / floor plugs, you will need to hit these in with a hammer. Be careful not to hit and break tile. c. Place clamp over holes and drill in screws to secure the clamp. Make sure these are securely fastened. 5.