Installation Guide

12
Once silicone has cured, you're done.
Please register your warranty using the instructions on
the back cover of this document.
11
Apply silicone to seal Fixed Panel.
Apply silicone around the wall and threshold surface of
the Fixed Panel. You need to silicone both the inside and
outside edges ensuring the gap between glass and tile
is completely sealed.
Once sealed, spray the silicone with water and use
a spatula (available in our Install Kit) to remove any
silicone residue.
Important: It is critical that the
silicone is given 24 hours to set
and 48 hours to cure.