GW-SFP - 10"- 33.
A B x3 x3 C Included in your purchase: A Fixed panel (GW-F) B Clips, screws and anchors C Rubber block set (various sizes)
Thank you for your purchase. If for any reason you are having trouble with installation, or if the size of the product does not fit your designated space, please contact Glass Warehouse directly and do not return this product to place of purchase. We will be able to exchange the panels or parts to suit your opening. Glass Warehouse takes pride in providing quality products and customer service. We want to ensure your happiness with your purchase for years to come.
Installation Guide 1⁄8" A B C D E ¼" F G H I J Tools required for install A B C D E Silicone and caulking gun Power drill Phillips head screwdriver Pencil ⅛" tile drill bit F G H I J ¼" tile drill bit Utility knife Level Hammer Tape measure Note: Silicone is not provided and will need to be purchased separately. We recommend using a clear, mold resistant silicone which can be purchased at your local hardware store.
70" 8" Subtract 3 1⁄2" from Fixed Panel width. 01 02 Measure and mark the Fixed Panel location. Mark locations for Clips. Use a level and mark a line up the wall on the side you wish to place the Fixed Panel. Along the shower base threshold, draw a line equal measure in from the front edge of the threshold. This is your center line for the Clips. A 70" from the shower base threshold, up the vertical line for the first Wall Clip.
Position grub screw to inside of shower 03 04 Drill holes for Wall Clips. Fix Wall Clips for Fixed Panel. Using a 1⁄4" drill bit, drill holes and install the wall anchors. Trim excess from the wall anchors hanging out of hole with utility knife so clips sit flush to wall. Place Wall Clips over holes and drill in screws to secure the Clips. Be sure grub screws on Clips are facing the shower interior. Make sure the clips are securely tightened to the wall.
Position grub screw to inside of shower 3 1⁄2" Do not drill if using optional 1⁄8" Rubber Blocks instead of Bottom Clip. Please see step 8 for more info. 05 06 Drill hole for Bottom Clip option. Install Fixed Panel Bottom Clip and Rubber Block. If you are not drilling into your shower base and prefer the Rubber Blocks option instead of using the Bottom Clip, please go to step 8.
3 1⁄2" 3 1⁄2" 07 08 Install and level Fixed Panel into the Clips. Measure and place Rubber Blocks. Carefully place the Fixed Panel into Wall Clips, Bottom Clip and on to Rubber Block. Make sure the Fixed Panel is set all the way into the Wall Clips. Use a level to make sure the Fixed Panel is level. Tighten Clip screws. If you are not drilling into the shower base and prefer the Rubber Blocks option instead of using the Bottom Clip, continue here. Please continue to step 10 to complete installation.
09 10 Install and level Fixed Panel into Wall Clips and onto Rubber Blocks. Trim Rubber Blocks. Carefully place Fixed Panel into Wall Clips and on to Rubber Blocks. Make sure the Fixed Panel is set all the way into the Wall Clips. Use a level to make sure the Fixed Panel is level. Tighten Clip screws. Tip: Use additional rubber blocks on either existing blocks to raise/drop the fixed panel if required. Trim the Rubber Block with a utility knife so that it is flush with the Glass Panel resting on top.
11 12 Apply silicone to seal Fixed Panel. Once silicone has cured, you're done. Apply silicone around the wall and threshold surface of the Fixed Panel. You need to silicone both the inside and outside edges ensuring the gap between glass and tile is completely sealed. Please register your warranty using the instructions on the back cover of this document. Once sealed, spray the silicone with water and use a spatula (available in our Install Kit) to remove any silicone residue.
Care & Maintenance EnduroShield makes cleaning easier and less frequent; however it is recommended that you continue to clean the surfaces regularly. Maintaining the Treated Surface Approved Cleaning Products For best results simply drying the glass with a squeegee or towel after each use will help keep the glass clean and reduce mineral spots forming.
Featured Model: Kira GL ASSWAREHOUSE .
Reflect on a New Look Explore our complete range of accent mirrors to compliment your new shower. Choose from many different styles, finishes, and options to give your bathroom that extra bit of style.
Exclusive Limited Warranty Terms & Conditions. This warranty is effective as of JANUARY 1, 2019 on all Glass Warehouse product purchases PLEASE READ GLASS WAREHOUSE WARRANTY TERMS AND CONDITIONS BEFORE INSTALLING YOUR GLASS WAREHOUSE PRODUCT. BY USING THE PRODUCT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS Glass Warehouse offers the following warranty for its products and components thereof.
obligation shall be discharged upon tender of parts, replacement or repair of the product. Purchaser’s refusal to accept the tender terminates all warranty obligations and VOIDS THE WARRANTY. Cost of freight for returning products to Glass Warehouse for repairs or replacement under this limited warranty are the responsibility of the customer. Cost of freight associated with shipping of replacement product(s) or parts covered by this warranty is the responsibility of the original user.
Register Your Warranty Today! To activate your limited lifetime warranty, please visit: https://www.glasswarehouse.us/contact/ We will require this information within 30 days of purchase to complete the activation of your warranty.