Manualshelf

Installation Guide

ManualsBrandsGlass Warehouse ManualsAlcove Shower Doors60 in. - 64 in. x 78 in. Frameless Sliding Shower Door in Matte Black with Handle
12345678910
BP05P2
Sliding Shower Door Installation Guide
BP05P2
SD14
SD17
SD17
SD20
SD9
SD21
SD18
SD1
SD8
SD5
SD6
SD7
SD2
SD10
SD4
SD5
SD17(2X)
SD12(2X)
SD11(2X)
SD17(2X)
SD20(2X)
SD14(2X)
SD13
SD19 SD15 SD16
SD9(2X)
SD15(2X)
SD2
SD6
SD19(2X)
SD19(2X)
SD20(2X)
SD10(3X)
SD7 SD8
SD3
SD4
SD13(1X)
SD21(1X)
SD16(2X)
SD18
SD9 SD11 SD12 SD13
SD14
2X
2X 2X 2X
2X2X 1X 1X 1X
2X 1X
4X 2X8X
SD15 SD16
SD19 SD20 SD21 SD4 SD5
SD17 SD18
1 1/8”
1 1/2”
1”
BP05P2
SD14
SD17
SD17
SD20
SD9
SD21
SD18
SD1
SD8
SD5
SD6
SD7
SD2
SD10
SD4
SD5
SD17(2X)
SD12(2X)
SD11(2X)
SD17(2X)
SD20(2X)
SD14(2X)
SD13
SD19 SD15 SD16
SD9(2X)
SD15(2X)
SD2
SD6
SD19(2X)
SD19(2X)
SD20(2X)
SD10(3X)
SD7 SD8
SD3
SD4
SD13(1X)
SD21(1X)
SD16(2X)
SD18
SD9 SD11 SD12 SD13
SD14
2X
2X 2X 2X
2X2X 1X 1X 1X
2X 1X
4X 2X8X
SD15 SD16
SD19 SD20 SD21 SD4 SD5
SD17 SD18
1 1/8”
1 1/2”
1”
BP05P2
SD14
SD17
SD17
SD20
SD9
SD21
SD18
SD1
SD8
SD5
SD6
SD7
SD2
SD10
SD4
SD5
SD17(2X)
SD12(2X)
SD11(2X)
SD17(2X)
SD20(2X)
SD14(2X)
SD13
SD19 SD15 SD16
SD9(2X)
SD15(2X)
SD2
SD6
SD19(2X)
SD19(2X)
SD20(2X)
SD10(3X)
SD7 SD8
SD3
SD4
SD13(1X)
SD21(1X)
SD16(2X)
SD18
SD9 SD11 SD12 SD13
SD14
2X
2X 2X 2X
2X2X 1X 1X 1X
2X 1X
4X 2X8X
SD15 SD16
SD19 SD20 SD21 SD4 SD5
SD17 SD18
1 1/8”
1 1/2”
1”
BP05P2
SD14
SD17
SD17
SD20
SD9
SD21
SD18
SD1
SD8
SD5
SD6
SD7
SD2
SD10
SD4
SD5
SD17(2X)
SD12(2X)
SD11(2X)
SD17(2X)
SD20(2X)
SD14(2X)
SD13
SD19 SD15 SD16
SD9(2X)
SD15(2X)
SD2
SD6
SD19(2X)
SD19(2X)
SD20(2X)
SD10(3X)
SD7 SD8
SD3
SD4
SD13(1X)
SD21(1X)
SD16(2X)
SD18
SD9 SD11 SD12 SD13
SD14
2X
2X 2X 2X
2X2X 1X 1X 1X
2X 1X
4X 2X8X
SD15 SD16
SD19 SD20 SD21 SD4 SD5
SD17 SD18
1 1/8”
1 1/2”
1”
Step 6 - Model numbers & opening adjustability below.
Measure your opening width and the rod should be 1” less than
this measurement. For example if your opening measurement is
47” your rod length should be 46”. Very important when cutting
rod YOU MUST cut rod at opposite end to the fixed panel brackets.
Step 8 - Using 1/4” drill bit, drill holes and install wall plug. On one wall install only the round flat fixing piece with rest of
bracket remaining on rod. On the second wall install the complete bracket. This allows you to slide the rod into one whole
bracket and then screw remaining bracket on at opposing wall. Re-check the rod and glass and fixed panel are level
then tighten the brackets on fix panel very tight.
Step 7 - Install the brackets on shower rod into the holes on
the fixed panel. Using a level, check rod is perfectly level from
one wall to the other. Once in correct position mark the place-
ment of brackets on wall and uninstall rod from glass panel.
Remove one of the wall brackets from rod and mark the holes
to be drilled on each wall.
GW-SLD-48 = 44” - 48”
GW-SLD-52 = 48” - 52”
GW-SLD-56 = 52” - 56”
GW-SLD-60 = 56” - 60”
GW-SLD-64 = 60” - 64”
GW-SLD-68 = 64” - 68”
GW-SLD-72 = 68” - 72”