Installation

STEP12 -- Seal from the inside with Silicone:
Apply Silicone Sealant along the inside face of the Vertical Wall Jamb, Bottom “U” Channel, Curb Dam and the seam
between the Cover Plate and the U Channel as per the drawing and details #12.
(No sealant is required on the Center Guide.)
Let cure for 24 hours before use.
End Cap
Plastic Insert
Splash Guard
DETAIL #12a --
Sealing the Wall Jamb and Curb Dam
DETAIL #12 -- Caulking Top view
15
Silicone Sealant is shown here as applied
to the INSIDE of the unit.