Installation

KK
9
JJ
PRE-ASSEMBLE THE INNER DOOR:
(Note: the Inner Glass Door has and identifying label.)
STEP 9. Install both of the inner glass door Roller Assemblies
on the door. The each assembly has twin rollers that face
out. Do not tighten the back screws on the assembly. The
rollers must sit tight on the glass but the back screw must
only be hand tight.
Detail 9D
Detail 9C -- Top View
Detail 9D -- Section View
Detail 9A
Install the inner rollers
on the inner glass door.
Do not tighten the back screws
of inner roller assembly.
The roller assembly must
be loosely fixed on glass at this
time.
Detail 9B -- Inner Roller Assembly (Exploded View)
Detail 9C -- Inner Roller Assembly
(as supplied assembled)
Do not tighten the back screws
of inner roller assembly.
The roller assembly must
be loosely fixed on glass at this time.
Inner Glass
Inner Glass
Front Plate of
the Roller
Inside view of optional Poly Splash Guard as
installed before the door is hung from the header.