Installation

8
Glass Shelves Installation
After the Mirrored Cabinet box has been properly in-
stalled, determine the appropriate height and location for
the glass shelves.
Note: make sure the back wall mirror has been
completely cleaned after installation. If cleaning the back
wall mirror is necessary, use a household non-ammonia
glass cleaner.
Cleaning Recommendations:
Never use abrasive cleaners or cleaners containing
ammonia. This may cause chemical damage to the
mirror and void the warranty.
24” Height Series = 2 Shelves + 8 Shelf Clips
30” Height Series = 3 Shelves + 12 Shelf Clips
36” Height Series = 4 Shelves + 16 Shelf Clips
For cleaning the mirror, we recommend using
“ammonia free” Sprayway brand glass
cleaner, which is available at a variety of re-
tail outlets.
www.spraywayinc.com/content/glass-cleaner
Each glass shelf will require four (4) shelf
clips. Use care when handling the non-tem-
pered glass shelves. On a level plane insert
the shelf clips into the pre-punched holes.
The clips are designed for a tight tension t
to hold the shelf. Place each glass shelf on the top of
the left clip rst, then slowly lower onto the right clip with
a snap t.
After glass shelves are installed insert hole plugs in all
open holes to complete installation.
Hole Plugs