Installation

7
Side Mirror Kit parts list:
2 Mirror side panels to match
the model height ordered
4 Side kit brackets with adhe-
sive tape
6 2”x2” Black Foam Pads with
peel off adhesive tape on both
sides
8 Screws, 10-32 x 1/2”
8 Screw Caps ( part # 434-00)
2 Alcohol Pads
Align mirror to level
with Top Edge
Side Mirror Bracket
Side Mirror Bracket
Side Mirror
Bracket
Side Mirror
Side Mirror Kit
2”x 2” Black
Foam Pads
with peel off
adhesive side
affix pads
to the
cabinet
Peel off paper covering adhesive
Side Mirror
Install Side Mirror:
• Install foam pads
on the outside wall
above, below and
in between
the brackets
• Clean back side of
mirror with
alcohol pads
• Peel-off paper
covering the
adhesive tape
on the brackets-
(this holds the
mirror in place)
• Align mirror
top and bottom
• Press firmly in place
(Do not try to remove
mirror as it will break)
Peel off paper
covering adhesive
on Bracket
To view a video showing helpful tips on how to install mirrored side
kits, please go to GlassCraftersMirroredCabinets.com and navigate
to the cabinet product that you are installing. Simply click on the
installation tab (located below the product images) to view our
installation videos.
Side Mirror Kit Installation
For surface mounted 4” & 6” Mirrored Cabinets and
6” semi-recessed Mirrored Cabinets.
1) Attach the side mirror kit brackets thru the pre-punched
holes in your cabinet.
2) Try to use the rst row from the top and bottom of your cabi-
net. Using the eight 10 -32 x 1/2” screws fasten the
brackets and nish with screw caps.
3) Attach the 2” x 2” foam pads to the outside cabinet wall
above, below and in between the position of the brackets.
4) Clean the backside of the side mirror kit panel with the Alco
-
hol pads. Check alignment before you attach the mirror to be
sure it will align even with the top of the cabinet.
5) Peel off paper covering of the adhesive tape on the side kit
brackets pads. (This holds the mirror in place). Carefully align
the mirror to the cabinet evenly on all four sides. Press rmly
into place and attach to the side kit mirror to the cabinet body.
(Note: Once installed, do not try to remove the mirror as it will break.)
Side Mirror Bracket
Side Mirror
10-32 1/2” Screws
2” x2” Foam Pads