Installation

4
Installing a
Recessed & Semi-Recessed
Mirrored Cabinet
A. Determine the rough opening for the cabinet. Refer to
“R.O.” formula chart on page 3. Opening must be plumb
and level.
B. Cabinet comes hinged on left or righ side. Be sure to
determine the proper hinge location for the unit before in-
stalling.
C. Insert cabinet in R.O. and center, Cabinet Flange cov-
ers any space in the R.O. around the cabinet and should
cover the nished surfaces--Sheetrock and/or tile.
Install the cabinet with four (4) #10 x 1 1/2” wood screws
(supplied). Use the pre-punched holes above and below
the hinge plates (as shown). Do not overtighten. Cover
screws with screw caps (part #434).
2x4
Framing
Shown
PLUMB
LEVEL
B
A
C
Hinge Plate shown for right hinged door. Handed door
is determined at the time of order. Be sure to install with
left or right hinged unit on the correct side.
Drawings not shown to scale
for Full-Length
Mirrored Cabinets