Installation

ManualsBrandsGlasscrafters ManualsCabinetsCabinet

Please use extreme care while unpacking and handling your GlassCrafters’ Mirrored Cabinet. Report any damage

immediately to our GlassCrafters customer service team at 800-233-7362,

Monday thru Friday from 8:00 am to 5:00 pm (EST)

GC2072

GC1672

Full-Length Mirrored Cabinet

Installation Instructions

Congratulations on your purchase of Americas nest Mirrored Cabinet by GlassCrafters, Inc.

World class engineering and state of the art design will enable you to enjoy your cabinet for many years to come.

We realize that the marketplace offers many choices and we thank you for selecting

GlassCrafters for your Mirrored Cabinet needs.

The following instruction sheets include the ALL MODELS listed below in both

4” deep and 6” deep Mirrored Cabinets.

Revised 05/2016

GLASSCRAFTERS, INC

193 Veterans Blvd., Carlstadt, NJ 07072

1+(800) 233-7362 (F) 1+(888) 233-7362

sales@glasscraftersinc.com

To view a video showing helpful tips

on how to --

adjust our Cabinet HInges

to install our Mirrored Side Kits,

please go to:

GlassCraftersMirroredCabinets.com

and navigate to the cabinet product

that you are installing.

Simply click on the

installation tab

(located below the

product images)

to view our

installation videos.”

To insure proper installation we recommend installation by a professional installer.

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERNCE

Summary of content (12 pages)

PAGE 1
GLASSCRAFTERS, INC 193 Veterans Blvd., Carlstadt, NJ 07072 1+(800) 233-7362 (F) 1+(888) 233-7362 sales@glasscraftersinc.com Full-Length Mirrored Cabinet Installation Instructions Congratulations on your purchase of Americas finest Mirrored Cabinet by GlassCrafters, Inc. World class engineering and state of the art design will enable you to enjoy your cabinet for many years to come.
PAGE 2
Full-Length Mirrored Cabinet Installation -Unpack all parts carefully and protect Glass and Mirror parts during installation. Index Parts List for All Models ....................................2 Determining the Rough Opening......................3 Recessing the Cabinet .....................................4 Combining two (2) or three (3) Cabinets .........5 Surface Mount Cabinet.....................................6 Surface Mount Side Kit Installation...................7 Glass Shelves.....................
PAGE 3
Tools Required for Installation E. Power Screw Driver F. Electric Drill G. 8mm 3/16” Masonry Drill Bit H. 7/32” Drill Bit I. Non Ammonia Household Glass Cleaner J. Soft Paper Towels GlassCrafters recommends the following tools to properly and safely install your Mirrored Cabinets. A. Safety Glasses -- should be worn at all times B. Tape Measure C. Level D. #2 Phillips Head Screw Driver Determining the Rough Opening “RO” Dimension Framing in new construction should follow these dimension.
PAGE 4
Installing a Recessed & Semi-Recessed Mirrored Cabinet B A. Determine the rough opening for the cabinet. Refer to “R.O.” formula chart on page 3. Opening must be plumb and level. B. Cabinet comes hinged on left or righ side. Be sure to determine the proper hinge location for the unit before installing. C. Insert cabinet in R.O. and center, Cabinet Flange covers any space in the R.O. around the cabinet and should cover the finished surfaces--Sheetrock and/or tile.
PAGE 5
Combining Two (2) or Three (3) Cabinet Units before Installation. Parts required to join Two (2) Cabinets: Cabinet depth Connector Part# Qty Any of the cabinets that are the same height may be joined to form one unit. Follow these instructions to create the final size unit before attempting installation. 4” deep 6” deep #426 #429 3 3 • Be sure to determine the hinge side door swing location for each unit.
PAGE 6
Installing a Surface Mount Mirrored Cabinet A. Determine the desired height and use a level to mark a horizontal line. Be sure to allow a minimum clearance of 1” above any base molding or a minimum of 4” for Toe Kick. Remember the base of the cabinet box is 3/4” smaller than the face and the door.
PAGE 7
Side Mirror Kit Installation Align mirror to level with Top Edge For surface mounted 4” & 6” Mirrored Cabinet and semi-recessed 6” Mirrored Cabinets. Side Mirror Kit Bracket Peel off paper covering adhesive 1) Attach the side mirror kit brackets thru the pre-punched holes in your cabinet. 2) Try to use the first row from the top and bottom of your cabinet. Using the twelve 1032 x 1/2” screws fasten the brackets and finish with screw caps.
PAGE 8
Glass Shelves Installation After the Mirrored Cabinet box has been properly installed, determine the appropriate height and location for the glass shelves. Note: make sure the back wall mirror has been completely cleaned after installation. If cleaning the back wall mirror is necessary, use a household non-ammonia glass cleaner. Cleaning Recommendations: Never use abrasive cleaners or cleaners containing ammonia. This may cause chemical damage to the mirror and void the warranty.
PAGE 9
Door Installation 2) Lift and snap into place The doors are packed individually for protection of the mirror surfaces. Carefully remove the door from the carton.* Hold the door in the upright position snap open the factory installed hinges. Place the hinge onto the factory-installed mounting plate in the cabinet -Toe first -- and snap into position. Be careful not to chip the door mirror.
PAGE 10
Limit Clips Limit Clips are provided should you need to reduce the opening swing of the cabinet door from 170 degrees to 130 degrees (see top view) This will eliminate the possibility of the door hitting a wall sconce or other decorative items.
PAGE 11
Master Parts List for Full-Length Mirrored Cabinets Model: GC1672-4" Model: GC 1672-6” Cabinet 4" Cabinet Cabinet 6" Cabinet Door - Boxed Separately Plastic Wall Anchor Wall Anchor Screws Bottom Surface Wall Mount Bracket Top Surface Mount Brackets Screw Caps Shelf Clips Hole Plugs *Cabinet Connectors 4" Cabinet *Cabinet Connectors 6" Cabinet *Cabinet Connector Mounting Screws Glass Shelves 4" Cabinet Glass Shelves 6" Cabinet Hinge Cover Name Plates 130 Degree Limit Clip Soft Close Cushion 3X Magnﬁcation Mi
PAGE 12
Cleaning Recommendations: Never use abrasive cleaners or cleaners containing ammonia. This may cause chemical damage to the mirror and void the warranty. For cleaning the mirror, we recommend using ammonia free Sprayway brand glass cleaner, which is available at a variety of retail outlets. www.spraywayinc.com/content/glass-cleaner To view a video showing helpful tips on how to -- adjust our Cabinet HInges or to install our Mirrored Side Kits, please go to: GlassCraftersMirroredCabinets.