Installation

9
Glass Shelves Installation
After the Mirrored Cabinet box has been properly in-
stalled, determine the appropriate height and location for
the glass shelves.
Note: make sure the back wall mirror has been
completely cleaned after installation. If cleaning the back
wall mirror is necessary, use a household non-ammonia
glass cleaner
.
Cleaning Recommendations:
Never use abrasive cleaners or cleaners containing
ammonia. This may cause chemical damage to the
mirror and void the warranty.
2 x 24” Height Series (54”H) = 4 Shelves + 16 Shelf Clips
2 x 30” Height Series (60’H) = 6 Shelves + 24 Shelf Clips
2 x 36” Height Series (72”) = 8 Shelves + 32 Shelf Clips
For cleaning the mirror, we recommend using
“ammonia free” Sprayway brand glass cleaner,
which is available at a variety of retail outlets.
www.spraywayinc.com/content/glass-cleaner
Each glass shelf will require four (4) shelf
clips. Use care when handling the non-tem-
pered glass shelves. On a level plane insert
the shelf clips into the pre-punched holes. The
clips are designed for a tight tension t to hold
the shelf. Place each glass shelf on the top of
the left clip rst, then slowly lower onto the
right clip with a snap t.
After glass shelves are installed insert hole plugs in all
open holes to complete installation.
Hole Plugs