Installation

ManualsBrandsGlasscrafters ManualsCabinetsCabinet

Please use extreme care while unpacking and handling your GlassCrafters’ Mirrored Cabinet. Report any damage

immediately to our GlassCrafters’ customer service team at 800-233-7362, Monday thru Friday from 8:00 am to 5:00 pm (EST).

Vertical Tier System Mirrored Cabinets

Installation Instructions

Congratulations on your purchase of Americas nest Mirrored Cabinet by GlassCrafters, Inc.

World class engineering and state of the art design will enable you to enjoy your cabinet for many years to come.

We realize that the marketplace offers many choices and we thank you for selecting

GlassCrafters for your Mirrored Cabinet needs.

The following instruction sheets include the ALL MODELS listed below in both

4” deep and 6” deep Mirrored Cabinets.

Vertical Tier System Mirrored Cabinets

Surface Mounted 4” deep cabinets:

Widths -- 16”, 20” & 24 “

Heights -- 54”, 60”, 66” & 72”

Surface Mounted 6” deep cabinets:

Widths -- 16”, 20” & 24 “

Heights -- 60”, 66” & 72”

Recessed mounted 6” deep cabinets:

Widths -- 16”, 20” & 24 “

Heights -- 60”, 66” & 72”

Revised 05 /2016

GLASSCRAFTERS, INC

193 Veterans Blvd., Carlstadt, NJ 07072

1+(800) 233-7362 (F) 1+(888) 233-7362

sales@glasscraftersinc.com

To insure proper installation we recommend installation by a professional installer.

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

To view a video showing helpful tips on how to -- adjust our Cabinet HInges or to install our Mirrored Side Kits, please go to:

GlassCraftersMirroredCabinets.com and navigate to the cabinet product that you are installing. Simply click on the installation tab

(located below the product images) to view our installation videos.

Summary of content (12 pages)

PAGE 1
GLASSCRAFTERS, INC 193 Veterans Blvd., Carlstadt, NJ 07072 1+(800) 233-7362 (F) 1+(888) 233-7362 sales@glasscraftersinc.com Vertical Tier System Mirrored Cabinets Installation Instructions Congratulations on your purchase of Americas finest Mirrored Cabinet by GlassCrafters, Inc. World class engineering and state of the art design will enable you to enjoy your cabinet for many years to come.
PAGE 2
Mirrored Cabinet Installation -- Unpack all parts carefully and protect Glass and Mirror parts during installation. Index Parts List for All Models ....................................2 Determining the Rough Opening......................3 Recessed & Semi Recessed VTS Cabinets .....4 & 5 Surface Mount VTS Cabinets ...........................6 & 7 Side Kit Installations .........................................8 Glass Shelves...................................................9 Cleaning Recommendation .......
PAGE 3
Tools Required for Installation GlassCrafters recommends the following tools to properly and safely install your Mirrored Cabinets. A. Safety Glasses -- should be worn at all times B. Tape Measure C. Level D. #2 Phillips Head Screw Driver E. Power Screw Driver F. Electric Drill G. 8mm 3/16” Masonry Drill Bit H. 7/32” Drill Bit I. Non Ammonia Household Glass Cleaner J. Soft Paper Towels Rough Opening: Note: Cabinet installs over finished wall with sheetrock and/or tile finishes completed.
PAGE 4
Installing a Recessed & Semi-Recessed Mirrored Cabinet below the hinge plates (as shown). Do not overtighten. Cover screws with four screw caps (part #434). A. Determine the rough opening for the cabinet. Refer to “R.O.” formula chart on page 3. Opening must be plumb and level. D. Place the VTS spacer on the top front of the bottom cabinet. Test fit the top cabinet. Check that it is plumb and level. E. Clean the top of the base cabinet to insure that the spacer tape will firmly adhere.
PAGE 5
PAGE 6
Installing a Surface Mounted Vertical Tier System Mirrored Cabinet A. Determine the desired height and use a level to mark a horizontal line. Be sure to allow a minimum clearance of 1” above and below any light fixture, obstruction and plumbing fixtures. Remember the base of the cabinet box is 3/4” smaller than the face and the door. B. After the bottom wall mount bracket is properly fastened to the wall, unpack the VTS Wall Bracket, VTSSpacer, Plastic Wall Anchors and Screws from the package.
PAGE 7
Surface Mounted Vertical Tier System 7 5 7. Fix top cabinet in place with the tape and top mounting brackets. 6. Clean the top of the bottom cabinet to be sure that the spacer will adhere in place. Fix the spacer with the double face tape to the bottom cabinet. Test ﬁt the top cabinet before removing the double face tape cover that will hold top cabinet in place. 5. Hold top unit in place; slide Top Brackets into the top groove of the cabinet and postion for stud location; mark for drilling.
PAGE 8
Side Mirror Kit Installation For surface mounted and semi-recessed Mirrored Cabinets. 1) Attach the side mirror kit brackets thru the pre-punched holes in your cabinet. 4) Clean the backside of the side mirror kit panel with the Alcohol pads. Check alignment before you attach the mirror to be sure it will align even with the top of the cabinet. 2) Try to use the first row from the top and bottom of your cabinet. Using the sixteen 10-32 x 1/2” screws fasten the brackets and finish with screw caps.
PAGE 9
Glass Shelves Installation After the Mirrored Cabinet box has been properly installed, determine the appropriate height and location for the glass shelves. Note: make sure the back wall mirror has been completely cleaned after installation. If cleaning the back wall mirror is necessary, use a household non-ammonia glass cleaner . Cleaning Recommendations: Never use abrasive cleaners or cleaners containing ammonia. This may cause chemical damage to the mirror and void the warranty.
PAGE 10
Door Installation The doors are packed individually for protection of the mirror surfaces. Carefully remove the door from the carton.* Hold the door in the upright position snap open the factory installed hinges. Place the hinge onto the factory-installed mounting plate in the cabinet -Toe first -- and snap into position. Be careful not to chip the door mirror.
PAGE 11
Limit Clips Limit Clips are provided should you need to reduce the opening swing of the cabinet door from 170 degrees to 130 degrees (see top view) This will eliminate the possibility of the door hitting a wall sconce or other decorative items.
PAGE 12
Cleaning Recommendations: Never use abrasive cleaners or cleaners containing ammonia. This may cause chemical damage to the mirror and void the warranty. For cleaning the mirror, we recommend using ammonia free Sprayway brand glass cleaner, which is available at a variety of retail outlets. www.spraywayinc.com/content/glass-cleaner To view a video showing helpful tips on how to -- adjust our Cabinet HInges or to install our Mirrored Side Kits, please go to: GlassCraftersMirroredCabinets.