Operation Manual and Parts Directory Lettuce Crisper This manual is specific to Lettuce Crispers manufactured PRIOR TO September 23, 2011, and PRIOR TO Serial Number 134133546X. LC Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780 800.748.0423 · 989.752.4275 · Fax 800.838.0888 / 989.752.4444 · www.glastender.com Rev. 03-24-14 © 2010 Glastender, Inc.
Index Topic Page Utility Requirements and Connections............................................................ 1 Uncrating and Start-up Instructions................................................................. 1 Operation.......................................................................................................... 1 Cleaning Instructions....................................................................................... 1 Wall Mounting Instructions...................................
Introduction This manual describes the operation features of the Lettuce Crisper. Please review this information before attempting installation and operation. Long term, trouble-free operation will follow if good housekeeping and maintenance procedures are followed. Thank you for selecting Glastender, Inc. products. UTILITY REQUIREMENTS AND CONNECTIONS Electrical: 115 Volt AC, 1 Phase, 60 Hz, 6.64 full load amps. A separate 15 amp circuit is required. A 10-foot grounded cord is included.
Wall Mounting Instructions WALL MOUNT BRACKET INSTRUCTIONS: CL OF HOLES 1. Mark a level line at the bottom of the lettuce crisper. 16" CL 24 ¾" 2. From this line measure up 24¾” and mark another level line. 16" C L 3. On this line drill holes to match the holes in the wall mount bracket. 4. Install wall mount bracket. 5. Attach lettuce crisper. BOTTOM OF LETTUCE CRISPER BOTTOM BRACKET 6. If lettuce crisper is not on an existing shelf, secure with bottom bracket.
Electrical and Refrigeration Specifications The following electrical and refrigeration specifications apply: Design Pressure Refrigerant Model Electrical Type Charge High Low R134a LC R22 LC 115V, 1 Ph., 60 Hz., 6.64 AMP 115V, 1 Ph., 60 Hz., 8.39 AMP R134a R22 8.0 oz. 6.75 oz. 232 285 88 144 ELECTRICAL DIAGRAM ITEM 1 2 3 4 5 W 115 VOLT 15 AMP. SERVICE RECOMMENDED GR.
Replacement Parts 2 1 18 9 11 8 7 14 5 13 10 3 16 15 17 4 Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780 800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.
Replacement Parts Model 1. 11000087 2. 11000088 3. 11000090 4. 11000093 11000138 5. 11000075 11000139 6. 11000069 11000124 7. 11000070 8. 11000131 9. 11000068 10. 11000076 11000201 11000202 11. LC-BIN 12. 11000108 13. 11000092 14. 11000095 15. 06001405 16. 06001632 17. 11000085 18. 06001314 11000149 Old Part No.
Condenser and Related Parts 5 15 11 10 13 14 16 9 12 17 22 21 20 6 Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780 800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • www.glastender.
Condenser and Related Parts 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Model 11000079 06001449 07000155 11000071 11000164 11000167 Old Part No.
Lettuce Crisper Replacement Parts Prior to 3/1/00 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Model 11000079 11000101 06001449 07000155 11000050 11000119 11000100 11000122 06001385 11000082 06001379 08000083 08000069 11000080 06001449 08000081 11000071 11000078 11000096 06001397 07000138 06001405 06001632 11000085 11000120 6 Old Part No.
Terms and Conditions Prices: All prices are LIST. Applicable taxes will be added. Quotations: Unless otherwise stated, quotations are effective for 30 days only. Acceptance: All orders are subject to acceptance by Glastender, Inc.’s headquarters in Saginaw, Michigan. Possession of the Product Directory and Price List is not an offer to sell. Shipments: F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or Collect if shipped directly to you.
Warranty Statement APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADA LABOR: Glastender, Inc. warrants all products to be free of defects in material and workmanship. In established areas, a start-up is included with glasswasher models GT-24 and GT-30. A 1-year labor warranty applies to all glasswashers.