Product Brochure
STAIN RESISTANT
MULTI-PURPOSE SEALER
CONCRETE, TILE & MASONRY
Allow additional drying time in moist climates. It can
be applied with a brush, wax applicator, or spray-
equipment dependent on porosity and roughness of
surface. Clean tools with water before sealer dries.
Apply between 55º and 80ºF. If it is necessary to apply
sealer on a warm day in direct sunlight, slightly damp-
en the surface to be sealed with a fine spray of water
prior to application of the sealer. Allow 72 hours cur-
ing time against heavy moisture and bulk water. Sealer
will continue to gain strength for up to one week.
Important Note: Always test a small area of surface
to be sealed to verify penetration and satisfaction of
sealed appearance.
Coverage: 100 to 400 square feet per gallon depen-
dent on porosity of the surface.
Maintenance: Glaze ’N Seal Floor Polish is recom-
mended as a protective finish over the sealer (indoors
only). Sweep and damp mop floor frequently.
Packaging: Concrete, Tile & Masonry Sealer is pack-
aged in quarts, gallons, 5 gallons and 55 gallon
drums.
SPECIFICATIONS
Base Aqueous Acrylic Copolymer
Tukon Hardness +6.0
Friction Level Excess 6.5
Glass Transition Point 34C
Density 8.58 lbs. per gallon
Refractive Index Approx. 1.4077
Solids Excess 16%
Appearance Milky White — Dries Clear
FORMULATED SPECIFICALLY FOR
• ALL DECORATIVE CONCRETE • PAVERS • SLATE • FLAGSTONE
• COLORED AND HARD TROWELED CONCRETE • BRICK • TERRAZZO
• STAMPED CONCRETE • EXPOSED AGGREGATE CONCRETE
Quality Products for Concrete, Tile and Masonry
Glaze ’N Seal Products, Irvine, CA • 800/486-1414
www.glaze-n-seal.com
FS 13-12/11
PRODUCT DESCRIPTION
A clear acrylic waterbase finish designed to protect and
beautify tile, concrete and masonry surfaces. Glaze
’N Seal protects against all organic stains including
cooking oil, grease and beverages. It may be used
indoors or outdoors and is extremely easy to apply
and maintain. Non-yellowing formula.
USES
• Waterseals, protects and improves appearance of
all unglazed tile, stamped and exposed aggregate
concrete, brick, natural and manufactured stone,
stucco and slate. Use as a base for interior nishes
such as Glaze ’N Seal Acrylic Floor Polish.
• Use to seal concrete and masonry surfaces prior to
painting or apply over painted or color stain surfaces
for added protection and improved appearance.
• Use indoors and outdoors.
FEATURES
• Repels Oil and Grease Stains
• Breathable
• Cleans up with Water
• Easy to Apply — Long Lasting
• Medium Gloss
• Reduces Eforescence
• Recoatable
• Qualies for LEED points
PREPARATION
All surfaces must be free of efflorescence, dirt, oil,
wax, grease and defective paint or sealers. If muriatic
acid is used, all acid residue must be removed prior
to application of sealer. Do not allow acid to dry. Use
Glaze ’N Seal Neutralizing Rinse to neutralize surface
before sealing.
APPLICATION
Apply two or more coats of sealer (do not allow it
to puddle). Make sure each coat is dry to the touch
before applying second coat; usually one to three
hours.