Product Brochure

MEXICAN TILE SEALER
®
FORMULATED SPECIFICALLY FOR POROUS
SALTILLO AND TECATE PAVERS . . . TERRA COTTA TILE
PRODUCT DESCRIPTION
Olé offers high gloss protection and beauty to unglazed
Mexican paver tile and other porous terra cotta surfaces
with fewer coats. A blend of the latest in acrylic polymer
technology has been coupled with an antimar agent, U.V.
inhibitors and a grease and oil blocker to become the perfect
solution for sealing porous tile.
FEATURES
• Use indoors and outdoors
• Builds film with fewer coats
• Resists oil, grease and food stains
• Hardens tile against chipping and abrasion
• Gives a long lasting, high gloss appearance
• Protects and beautifies
• Waterbase safe, easy cleanup
PREPARATION
Surface preparation is the MOST important part of applying
a clear sealer. All surfaces must be clean, dry, free of efflor-
escence, dirt, oil, wax, grease and defective paints or sealers.
When acid has been used as a cleaning material, the tile
surface must be neutralized and rinsed thoroughly prior to
application of the sealer. (Use Glaze ’n Seal Neutralizing
Rinse and follow instructions on the label).
®
Quality Products for Concrete, Tile and Masonry
Glaze ’N Seal Products, Irvine, CA
FS 16-3/03
APPLICATION
Apply Olé with a paint pad applicator, brush or low pressure
or airless sprayer. Apply 2 or more thin, even coats. Allow
to dry at least 4 hours between coats. Do not over apply.
Do not allow sealer to puddle. Surfaces coated with Ole
may be used within 24 hours after drying but will continue
to gain strength against stains and abrasion for up to three
weeks. Estimated coverage: 150-200 sq.feet/gallon with first
coat. Additional coats 200-300 sq feet/gallon.
CAUTIONS
Always read package directions and do a product test before
beginning a project to insure bonding to surface, ease of
application, appearance and oil and grease protection. For
denser Super Saltillos, machine manufactured pavers or
previous sealed tile the first coat of Olé may be diluted
with water to improve bonding. Olé may be used as a grout
release with 2 coats 48 hours before grouting. After grouting
and clean up wait 24 hours before sealing new grout.
MAINTENANCE
INDOORS . . . Apply and maintain Glaze ’N Seal Floor
Polish over Olé for abrasion protection and to extend the
life of Olé. Place protective pads under chair legs and
moveable furniture. Clean floors frequently with slightly
damp mop using Glaze ’N Seal Neutral Cleaner. For
more difficult cleaning or polish removal we recommend
Glaze ’N Seal Heavy Duty Cleaner.
OUTDOOR . . . Surface may be “hosed off” with plain water
or cleaned with Glaze ’N Seal Neutral Cleaner.
Olé may be reapplied for renewed appearance and added
protection as desired (after first removing any topical wax
or polish).
SPECIFICATIONS
BASE Aqueous Acrylic Co-Polymer
TUKON HARDNESS +11.0
FRICTION LEVEL Excess 6.0
GLASS TRANSITION POINT 34C
DENSITY 8.69 pounds per gallon
REFRACTIVE INDEX Approx. 1.5066
SOLIDS Excess 22%
APPEARANCE Milky White – Dries Clear