Gleichmann & Co. Electronics GmbH Industriestrasse 16 76297 Stutensee-Spöck / Germany SPECIFICATION CUSTOMER : MODULE NO.: GE-O1602F-TMI-AT/R APPROVED BY: ( FOR CUSTOMER USE ONLY ) PCB VERSION: SALES BY APPROVED BY CHECKED BY DATA: PREPARED BY ISSUED DATE: VERSION DATE B 2008.10.15 GE-O1602F-TMI-AT/R REVISED SUMMARY PAGE NO. 16 Modify Backlight life time.
MODLE NO： DOC. FIRST ISSUE RECORDS OF REVISION VERSION DATE 0 A B 2008/7/3 2008.09.11 2008.10.15 GE-O1602F-TMI-AT/R REVISED PAGE NO. 14 16 SUMMARY First issue Correct drawing. Modify Backlight life time.
Contents 1. Module classification information 2. Precautions in Use of LCD Modules 3. General Specification 4. Absolute Maximum Ratings 5. Electrical Characteristics 6. Optical Characteristics 7. Interface Pin Function 8. Contour Drawing 9. Function Description 10. Application SCH 11. Reliability 12.Backlight Information 13. Inspection specification 14.
1. Module Classification Information GE-O 1602 F –T M I AT/R Brand：Gleichmann Electronics Display Type：C→Character Type, G→Graphic Type, O→COG Type Display Font：16 characters x 2 Lines Model serials no.
2. Precautions in Use of LCD Module (1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of LCD Module. (3)Don’t disassemble the LCM. (4)Don’t operate it above the absolute maximum rating. (5)Don’t drop, bend or twist LCM. (6)Soldering:only to the I/O terminals. (7)Storage:pleasse storage in anti-static electricity container and clean enviroment. 3.
4.Absolute Maximum Ratings Item Symbol Min Typ Max Unit Operating Temperature TOP -20 － +70 ℃ Storage Temperature TST -30 － +80 ℃ Supply voltage for Logic VDD -0.3 － 6.0 V LCD Driver Voltage VLCD 7.0- VSS -0.3+ VSS V 5.Electrical Characteristics Item Symbol Condition Min Typ Max Unit 5 Supply Voltage For Logic VDD-VSS － 3 3.3 (bon=1 V max=3.5V) Supply Voltage For LCM Vout-VSS Ta=-20℃ － － － V Ta=25℃ 4.1 4.5 4.8 V Ta=70℃ － － － V Input High Volt.
6.
7.Interface Pin Function Pin No. Symbol Level Description Select registers. 0: Instruction register (for write) H/L Busy flag & address counter (for read) 1: Data register (for write and read) Select read or write (In parallel mode). H/L 0: Write 1: Read H,H→L Starts data read/write. (“E” must connect to “VDD” when serial interface is selected.
External capacitor about 0.1u~4.
8.Contour Drawing 7 2 .1 (B \L ) 6 9 .5 (L C D ) 1 .1 6 1 .0 (V A ) 4 .1 5 6 .2 (A A ) 5.4 4.0 2 .7 ¡ Ó 0 .2 2.0 K 7.7 10.0Max (22.04) 27.4(LCD) 1 .0 0 .7 P 1 .0 * 1 9 = 1 9 .0 2 1 .0 ¡ Ó 1 .0 2.0 A 0 .6 K D O T S IZ E S C A L E 5 /1 GE-O1602F-TMI-AT/R RS RW E DB0 D B1 DB2 D B3 DB4 DB5 D B6 DB7 V SS VDD VOUT PSB P S I2 B C A P1P C A P1N NC NC 0 .3 ¡ 0 Ó.1 5 0.65 0.70 5.95 5.55 3 .5 5 2 .9 5 0 .6 0 0 .5 5 20 4.6¡ Ó 1.0 1 (1 8 .
9.Function Description Please consult the spec of ST7032i GE-O1602F-TMI-AT/R page 11/23 07.07.
10. Application SCH WO1602F APPLICATION FOR 3V / Serial INTERFACE VSS VDD RS SCL SI VSS VDD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 RS RW E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 VSS VDD VOUT PSB PSI2B CAP1P CAP1N NC( VOUT) NC( V0) WO1602F GE-O1602F C2 WO1602F APPLICATION C1 FOR 3V / 4BIT INTERFACE ST7032i over Glass Bon : set booster circuit on / FON = 1 Pin connection : 01.EXT=0 02.OPR1=0 03.OPR2=0 04.SHLC=0 05.SHLS=0 06.OPF1=0 07.OPF2=0 08.CLS=1 09.4BIT interface 10.VOUT=VIN(max 3.
WO1602F APPLICATION FOR 3V / 8BIT INTERFACE VDD RS RW E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 VSS VDD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 RS RW E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 VSS VDD VOUT PSB PSI 2B CAP1P CAP1N NC( VOUT) NC( V0) WO1602F GE-O1602F C2 WO1602F APPLICATION C1 FOR 3V / IIC INTERFACE C2 GE-O1602F-TMI-AT/R ST7032i over Glass Bon : set booster circuit on / FON = 1 Pin connection : 01.EXT=0 02.OPR1=0 03.OPR2=0 04.SHLC=0 05.SHLS=0 06.OPF1=0 07.OPF2=0 08.CLS=1 09.
WO1602F APPLICATION FOR 5V / Serial INTERFACE WO1602F APPLICATION VDD VSS VDD RS SCL SI VSS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 RS RW E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 VSS VDD VOUT PSB PSI 2B CAP1P CAP1N NC( VOUT) NC( V0) WO1602F GE-O1602F ST7032i over Glass Bon : set booster circuit OFF / FON =1 Pin connection : 01.EXT=0 02.OPR1=0 03.OPR2=0 04.SHLC=0 05.SHLS=0 06.OPF1=0 07.OPF2=0 08.CLS=1 09.Serial interface 10.VOUT=VDD(max 5.
WO1602F APPLICATION FOR 5V / 8BIT INTERFACE VDD VDD RS RW E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 VSS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 RS RW E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 VSS VDD VOUT PSB PSI 2B CAP1P CAP1N NC( VOUT) NC( V0) GE-O1602F WO1602F ST7032i over Glass Bon : set booster circuit OFF / FON = 1 Pin connection : 01.EXT=0 02.OPR1=0 03.OPR2=0 04.SHLC=0 05.SHLS=0 06.OPF1=0 07.OPF2=0 08.CLS=1 09.8BIT interface 10.VOUT=VDD(max 5.5V) GE-O1602F GE-O1602F-TMI-AT/R page 15/23 07.07.
11. Reliability Content of Reliability Test (wide temperature, -20°C~70°C) Environmental Test Test Item Content of Test Test Condition Not e High Temperature storage Endurance test applying the high storage temperature for a long time. 80℃ 200hrs 2 Low Temperature storage Endurance test applying the high storage temperature for a long time.
12.Backlight Information Specification PARAMETER SYMBOL MIN TYP MAX UNIT TEST Supply Current ILED 13.6 16 Supply Voltage V 3.4 Reverse Voltage VR IV CONDITION 25 mA V=3.5V 3.5 3.6 V － － 5 V 158.4 198 － CD/M2 ILED=16mA － Luminous Intensity (Without LCD) X 0.26 0.28 0.3 Y 0.28 0.3 0.32 LED Life Time － － 50K － Color White Wave Length ILED=16mA Hr.
13. Inspection specification NO 01 02 Item Criterion AQL Electrical Testing 1.1 Missing vertical, horizontal segment, segment contrast defect. 1.2 Missing character , dot or icon. 1.3 Display malfunction. 1.4 No function or no display. 1.5 Current consumption exceeds product specifications. 1.6 LCD viewing angle defect. 1.7 Mixed product types. 1.8 Contrast defect. 0.65 Black or white 2.1 White and black spots on display ≦0.25mm, no more than spots on LCD three white or black spots present.
NO Item 05 Scratches Criterion AQL Follow NO.3 LCD black spots, white spots, contamination Symbols Define: x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length: 6.1 General glass chip : 6.1.1 Chip on panel surface and crack between panels: 06 Chipped glass z: Chip thickness y: Chip width x: Chip length Z≦1/2t Not over viewing area Not exceed 1/3k x≦1/8a 1/2t＜z≦2t 2.
NO Item Criterion AQL Symbols : x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length 6.2 Protrusion over terminal : 6.2.1 Chip on electrode pad : y: Chip width x: Chip length y≦0.5mm x≦1/8a 6.2.2 Non-conductive portion: 06 z: Chip thickness 0＜z≦t Glass crack 2.
NO Item 07 Cracked glass 08 09 10 Backlight elements Bezel PCB、COB Criterion AQL The LCD with extensive crack is not acceptable. 2.5 8.1 Illumination source flickers when lit. 8.2 Spots or scratched that appear when lit must be judged. Using LCD spot, lines and contamination standards. 8.3 Backlight doesn’t light or colour wrong. 0.65 2.5 0.65 9.1 Bezel may not have rust, be deformed or have fingerprints, stains or other contamination. 9.2 Bezel must comply with job specifications. 2.5 0.
NO Item Criterion AQL 12.1 No oxidation, contamination, curves or, bends on interface Pin (OLB) of TCP. 12.2 No cracks on interface pin (OLB) of TCP. 12.3 No contamination, solder residue or solder balls on product. 12.4 The IC on the TCP may not be damaged, circuits. 12.5 The uppermost edge of the protective strip on the interface pin must be present or look as if it cause the interface pin to sever. 12 General appearance 12.
14. Material list of components for RoHS 1. The manufacturer hereby declares that all of or part of products (with the mark “/R” in code), including, but not limited to, the LCM, accessories or packages, manufactured and/or delivered to your company (including your subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or affiliated companies) do not intentionally contain any of the substances listed in EU-Directive 2002/95/EC.
