Manual

Page 14 of 17
USER CONTROLS
1. Individual Output Gain/ Loss Controls
The front panel preset gain controls are recessed to prevent accidental usage. A small
screwdriver is required to adjust the controls.
There are 12 individual preset gain controls, one for each output.
To turn the output gain down (i.e. lower the output level of that channel) rotate the preset
pot anti-clockwise. To turn the output gain up (i.e. increase the output level of that channel)
rotate the preset pot clockwise.
These gain controls are factory set for unity gain (i.e. 0dB input on the rear produces 0dB
outputs). The overall gain / loss available is +15dB of gain and -10dB of loss. Therefore the unit
will easily accommodate domestic unbalanced levels.
2. Mono/ Stereo Switch
The front panel Mono/ Stereo toggle switch is used to set the unit between 2 stereo inputs &
6 stereo outputs; or 1 mono input & 12 mono outputs.
When the switch is in the ‘MONO’ position the left input only is routed to all 12 outputs. When
the switch is in the ‘STEREO’ position the left input is routed to the 6 left outputs and the right
input is routed to the 6 right outputs.
1.
Individual Output
Gain/ Loss Controls
2.
Mono/ Stereo Switch