SDS

GLD7411 GLIDDEN DIAMOND INTERIOR LATEX SEMI-GLOSS - PURE WHITE/BASE
1
Product name
1
Product code
Date of issue
Version
00380333
7 January 2016
Section 15. Regulatory information
SARA 302/304
SARA 304 RQ
:
Not applicable.
Composition/information on ingredients
SARA 311/312
Classification
:
Delayed (chronic) health hazard
titanium dioxide
No.
No.
No.
No.
Yes.
-
Name
Sudden
release of
pressure
Reactive
Immediate
(acute)
health
hazard
Delayed
(chronic)
health
hazard
Composition/information on ingredients
All components are listed or exempted.
United States inventory (TSCA 8b)
:
United States
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.
No products were found.
Section 16. Other information
Key to abbreviations
:
ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations
Hazardous Material Information System (U.S.A.)
0
0
0
National Fire Protection Association (U.S.A.)
Health
Instability
Flammability
Health
Flammability
Physical hazards
Date of previous issue
No previous validation
:
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are
to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS®
materials may be purchased exclusively from J. J. Keller (800) 327-6868.
The customer is responsible for determining the PPE code for this material.
Indicates information that has changed from previously issued version.
Organization that prepared
the MSDS
:
EHS
:
:
:
:
:
:
1
*
1
0
( * ) - Chronic effects
United States
Page: 11/12