SAFETY DATA SHEET Date of issue/Date of revision 7 January 2016 Version 1 Section 1. Identification Product name : GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Product code : 00380273 Other means of identification : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Product use : Industrial applications, Used by spraying. Use of the substance/ mixture Uses advised against : Coating.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 2. Hazards identification Prevention Response : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. : IF exposed or concerned: Get medical attention. Storage : Store locked up.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 4. First aid measures Potential acute health effects Eye contact : No known significant effects or critical hazards. Inhalation : No known significant effects or critical hazards. Skin contact : No known significant effects or critical hazards. Ingestion : No known significant effects or critical hazards.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 7. Handling and storage Conditions for safe storage, including any incompatibilities : Do not store below the following temperature: 5°C (41°F). Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 8. Exposure controls/personal protection Environmental exposure controls : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 9. Physical and chemical properties Evaporation rate : 0.05 (butyl acetate = 1) Vapor pressure : 3.3 kPa (25 mm Hg) [room temperature] Vapor density Relative density : Not available. : 1.2 Density ( lbs / gal ) : 10.01 Solubility : Partially soluble in the following materials: cold water. Partition coefficient: noctanol/water : Not available.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 11. Toxicological information Mutagenicity Conclusion/Summary : There are no data available on the mixture itself. Carcinogenicity Conclusion/Summary Classification : There are no data available on the mixture itself.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 11. Toxicological information Conclusion/Summary : There are no data available on the mixture itself. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 15. Regulatory information United States United States inventory (TSCA 8b) : All components are listed or exempted. SARA 302/304 SARA 304 RQ : Not applicable. Composition/information on ingredients No products were found.
Product code 00380273 Date of issue 7 January 2016 Version 1 Product name GLD7113 GLIDDEN DIAMOND INTERIOR LATEX FLAT ENAMEL - BASE 3 Section 16. Other information 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution) UN = United Nations Indicates information that has changed from previously issued version. Disclaimer The information contained in this data sheet is based on present scientific and technical knowledge.
