SDS

GLI2011N GLIDDEN HYDRORESIST PAINT + PRIMER + SEALER FLAT BASE 1
Product name
1
Product code
Date of issue
Version
00430875
22 July 2019
Section 2. Hazards identification
Signal word
:
Danger
Hazard statements
:
May cause cancer.
Causes damage to organs through prolonged or repeated exposure.
Hazard pictograms
:
Precautionary statements
Prevention
:
Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Wear protective gloves. Wear eye or face protection.
Wear protective clothing. Do not breathe vapor. Do not eat, drink or smoke when using
this product. Wash hands thoroughly after handling.
Response
:
Get medical attention if you feel unwell. IF exposed or concerned: Get medical
attention.
Storage
:
Store locked up.
Disposal
:
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
General
:
Read label before use. Keep out of reach of children. If medical advice is needed,
have product container or label at hand.
Supplemental label
elements
:
Contains isothiazolinones. May cause allergic reaction. Sanding and grinding dusts
may be harmful if inhaled. This product contains crystalline silica which can cause lung
cancer or silicosis. The risk of cancer depends on the duration and level of exposure to
dust from sanding surfaces or mist from spray applications. Emits toxic fumes when
heated. DANGER - RAGS, STEEL WOOL OR WASTE SOAKED WITH THIS
PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED.
IMMEDIATELY AFTER EACH USE, PLACE RAGS, STEEL WOOL OR WASTE IN A
SEALED WATER-FILLED METAL CONTAINER.
Hazards not otherwise
classified
:
None known.
Section 3. Composition/information on ingredients
titanium dioxide
≥10 - ≤20
13463-67-7
crystalline silica, respirable powder (<10 microns)
≥5.0 - ≤10
14808-60-7
Diatomaceous earth
≥1.0 - ≤5.0
61790-53-2
crystalline silica, respirable powder (>10 microns)
≥1.0 - ≤5.0
14808-60-7
Kaolin
≥1.0 - ≤5.0
1332-58-7
zinc oxide
≥1.0 - ≤5.0
1314-13-2
proprietary ingredient
≥1.0 - ≤5.0
Not available.
Ingredient name
CAS number
%
Substance/mixture
:
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Product name
GLI2011N GLIDDEN HYDRORESIST PAINT + PRIMER + SEALER FLAT BASE 1
:
SUB codes represent substances without registered CAS Numbers.
United States
Page: 2/14