SDS
GL6111 GLIDDEN PREMIUM EXTERIOR ACRYLIC FLAT WHITE (BASE 1)
Product name
15.01
Product code
Date of issue
Version
00409260
25 June 2019
Section 2. Hazards identification
Signal word
:
Warning
Hazard statements
:
Suspected of causing cancer.
Hazard pictograms
:
Precautionary statements
Prevention
:
Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Wear protective gloves. Wear eye or face protection.
Wear protective clothing.
Response
:
IF exposed or concerned: Get medical attention.
Storage
:
Store locked up.
Disposal
:
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
General
:
Read label before use. Keep out of reach of children. If medical advice is needed,
have product container or label at hand.
Supplemental label
elements
:
Contains isothiazolinones. May cause allergic reaction. Sanding and grinding dusts
may be harmful if inhaled. Emits toxic fumes when heated.
Hazards not otherwise
classified
:
None known.
Photosensitive agents : In case of accidental eye contact, avoid direct exposure to the
sun or other sources of UV light as severe irritation including burns may result. These
reactions can be delayed – get medical attention if pain, irritation or blistering occurs
after contact. In case of accidental skin contact, avoid direct exposure to the sun or
other sources of UV light as severe irritation including burns may result. These
reactions can be delayed – get medical attention if pain, irritation, rash or blistering
occurs after contact.
Section 3. Composition/information on ingredients
titanium dioxide
≥10 - ≤20
13463-67-7
zinc oxide
≥5.0 - ≤10
1314-13-2
Kaolin
≥1.0 - ≤5.0
1332-58-7
Ingredient name
CAS number
%
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Substance/mixture
:
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Product name
GL6111 GLIDDEN PREMIUM EXTERIOR ACRYLIC FLAT WHITE (BASE 1)
:
SUB codes represent substances without registered CAS Numbers.
United States
Page: 2/13