SDS

GL6111 GLIDDEN PREMIUM EXTERIOR ACRYLIC FLAT WHITE (BASE 1)
Product name
15.01
Product code
Date of issue
Version
00409260
25 June 2019
Section 8. Exposure controls/personal protection
Respiratory protection
:
Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator. If workers
are exposed to concentrations above the exposure limit, they must use appropriate,
certified respirators. Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is necessary.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
1.34
Not available.
Not available.
Soluble in the following materials: cold water.
Characteristic.
Odor
pH
Not available.
Color
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Closed cup: Not applicable. [Product does not sustain combustion.]
Not available.
Not available.
Viscosity
Kinematic (40°C (104°F)): >0.21 cm
2
/s (>21 cSt)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
>37.78°C (>100°F)
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
% Solid. (w/w)
:
52.243
Density ( lbs / gal )
:
11.18
Volatility
:
64% (v/v), 47.757% (w/w)
Section 10. Stability and reactivity
Conditions to avoid
The product is stable.
Chemical stability
:
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
When exposed to high temperatures may produce hazardous decomposition products.
Refer to protective measures listed in sections 7 and 8.
United States
Page: 7/13